Today weve got a 2010 Infinity FX35. Were going to be test fitting the Yakima Fronloader roof-mounted bike carrier, part number Y02103. Our FX35 is equipped with a full factory roof rack, so were going to mount our Frontloader directly to the factory crossbars. To do this, well place the carrier up on top of the crossbars. Well fit the front clamp around our front bar and use the hand knob to tighten it down. In the rear well fit the clamp around the rear bar and use the T-bolt and wing nut to tighten that clamp.
Once weve tighten down the two clamps, our bike rack is installed and were ready to start loading up. We need to make sure that the front wheel hoop is open and that the wheel strap at the back of the carrier is also open. Well pick up our bike and place it in the carrier. Well push the bike forward against the front wheel hoop and bring the rear wheel hoop up behind the front tire. Then, well use the red hand knob to tighten down the hoops around the front tire.
Then we can move back and use the wheel strap to secure the rear wheel of the bike. With that done, our bikes all loaded up and were ready to hit the road. Thats it for our test fit of the Yakima Fronloader roof-mounted bike carrier, part number Y02103 on our 2010 Infinity FX35.
Yakima ForkLift Roof Mounted Bike Rack Review - 2010 Infiniti FX35
Today were working with a 2010 Infiniti FX35 and were going to be test fitting the Yakima Forklift Roof-Mounted bike carrier, part number Y02098. To fit the carrier to our roof rack, were going to place it on top of our crossbar. Well fit the front clamp around the front crossbar and use the wing nut to tighten it down. Once weve done that, well reinstall the cover and then reinstall our skewer. At the rear of the carrier, well fit the clamp around the rear bar and use the t-bolt and wing nut to tighten it down as well. Then we just need to make sure that our skewer is unlocked and open and that the wheel strap is open at the rear of the carrier and then were ready to load our bike.
RockyMounts TieRod Roof Bike Rack Review - 2010 Infiniti FX35
Today on our 2010 Infiniti FX35, we are going to be test fitting the Rocky Mounts tie rod roof mounted bike carrier, part number RKY1014. Our FX35 is already equipped with a full factory roof rack so we are going to mount our tie rod directly to the factory cross bars. To do this, we will set the carrier up on top of the cross bars. We will take the rubber coated steel straps at the front of the carrier, wrap them around our cross bars and resecure them to the head. Then we will tighten it down with an allen key. At the rear of the vehicle we will take the clamp, fit it around our rear cross bar and use the wing nuts to tighten down the rear clamp.
Thule Domestique Roof Bike Rack Review - 2006 Infiniti FX35
Today on this 2006 Infinity FX35 well be test fitting Thule Domestique roof mounted bike carrier, part number TH513. Our FX35 already has a full roof rack from the factory. So we can just set our carrier up on top. Well fit the front clamp around our front bar and well use the included Allen key to tighten it down. Once weve done that we can go ahead and reinstall our forint skewer. At the rear well fit the clamp around our rear bar and again use the Allen key to tighten it down.
RockyMounts TieRod Roof Bike Rack Review - 2006 Infiniti FX35
Today with us we have a 2006 Infinity FX35 and well be test fitting the rocky mount tire rad roof mounted bike carrier, part number RKY1014. Our FX35 is equipped with a full factory roof rack. So we can put out ride carrier right on to the factory cross cars. Well fit the head of the carrier over the front bar. Well feed the rubber coated steel straps around the front bar, reattach the head and use the included Allen wrench to tighten them down. Once we have done that we can reinstall the front cover.
