Alright today, on our 2005 Chevrolet 2500HD 8-Foot Bed Pickup Truck, we're going to do a test fit of Yakima part number Y01133 for locking bedhead. Alright, one quick note about this bike carrier is that it does grip to the side of the bed of the truck and you cant use it with bed liners. However, if you would accommodate for it, you may have to cut a hole in for a bed liner. In this case, we dont have a bed liner so it will be very easy to see how it operates. We'll start off by positioning the rail clip and then well put the fork lock in position. Once we have it where we want it, we'll go ahead and tighten it down with the provided Allen key.
As you can see, it doesnt take much to tighten it down. Now, we'll go ahead and install a locking skewer. Alright, the bike rack is ready to accept the bike so lets go ahead and load up the bike. Ok, well, let's go ahead and take our bike. Remove the front wheel and load it onto the bike rack.
With the clamp down into place, we'll go ahead and lock it down. And with that, that will finish it for our test fit of part number Y001133, the Locking BedHead from Yakima, on our 2005 Chevrolet 2500HD 8-Foot Bed Pickup.
All right today on Chevrolet 2500 HD a foot bed pick up we are going to do a test fit a part number UG2500 this is from top line. Okay well start of bike carrier loss assemble as according instruction will go ahead and put on a rail. Now this will sit on to side rail of the bed. Now the truck didnt have a bed liner you would have to cut whole lot for that to make an accommodation for the rack. This case the truck does not have the bed liner. Well start up by installing the bed roof clamp assembly.
Alright today on this 2005 Chevrolet 2500 8-foot bed we're going to do a test fit of product number TH822XT from Thule. This is their Bed Rider Bicycle Rack. Alright, a couple of quick notes about this bike rack. It is designed for two bikes and it's also not recommended to use with over the rail bed liners. Now we've got our bike rack already assembled according to instructions so it's just a matter of finding a place on the truck and clamping it into place. We'll start off with the lock open and then move ahead and adjust the width to match the bed, and then we'll twist the whole rack to expand it so it gets a crib on the bed.
Alright, today on the 2005 Chevrolet 2500 pickup truck, 8-foot bed, we're going to do a test fit of product number S64702 from Swagman. This is the Pickup Rack 2 Bike Carrier. The rack has already been assembled according to instructions so it's just a matter of finding a place on a truck bed to load it up. Well, a couple of quick notes about this, is that it does not work well with over rail bed liners. Under the rail would be fine. We'll start off with the rack in the open position.
Alright today on this 2012 Chevrolet Silverado, 8 foot bed, we are going to do a test fit of Swagman Bicycle Rack, part number s64702. Couple quick notes about this bicycle rack is that it mounts to the top of the truck bed, and can fit any size truck bed, and carries up to two bikes. And also there is a integrated lock that secures the rack to the truck bed. Pretty simple device lets go ahead and install it. You want to start off with the bike rack in its open position. You will see how it has a angle to it.