Today on our 2005 Pontiac Grand Prix, we're going to install Part # 56076 from Curt. First thing we need to do is go ahead and open the trunk and remove the interior panels. On the passenger side of the threshold, there are two screws that need to be removed. We'll repeat this on the driver side then we can go ahead and remove the threshold. Next we're going to remove the wing nuts on both sides and loosen up the side carpet. Next we'll go ahead and remove the fasteners to attach our taillight so we can pull it apart.
Next we'll disconnect the plug from the taillight, just push down the tab and pull it apart. We'll repeat this for the passenger side. Now we'll take the four pull wire, drop it down behind the bumper, well also do the same thing with the T-connector with the green wire. Then we'll take this half and plug in to the factory harness. We'll reattach this back to the taillight and then reattach the taillight to the car.
Now we'll go ahead and take our four pull and run it over thru the hitch and we'll try to run it over the bumper support so they can stay away from the exhaust. Now, we'll continue on with T-harness and the green wire, well do the same thing and run it over to passenger side taillight. Well take our wire harness, pull it up and out and well attach it to the factory wire harness. Then we'll take a white wire at the ring terminal attach to the sheet metal. We can go ahead and reattach our taillight now.
Now were going to add additional lean clamp to hold the wires in place. Now we can go ahead and add our cover for the four pull. Now you can go ahead and reinstall the interior components. All right, and with that, that will finish it for our install of Part # 56076 from Curt on our 2005 Pontiac Grand Prix.
