Today on this 2012 Jeep Grand Cherokee were going to install the Curt hitch part #: c13065. Here are a couple of measurements that will assist you in selecting accessories for your new hitch. From the center of the hitch pinhole to the outermost point of the bumper is 4 and a quarter inches. From the top of the receiver tube to the ground will be 15 and inches. Now lets go ahead with the installation. Alright, before we can install the hitch we need to remove the four frame bolts located inside the frame, theres two on each side.
Both sides are identical so everything we do here to the passenger side well repeat identically on the driver side. Occasionally the manufactures cock that seams the floor pane and the beam together is excessive and youll need to take a utility knife and cut the cock back. On this application it does not interfere so we will not have to cut the cock back. Now were ready to go ahead and install our hitch. Its a good opportunity to get a second set of hands to help you hold the hitch in place while you install the fasteners.
Well install each of our fasteners finger tight until we get all four in place. Alright, now were ready to go ahead and tighten our fasteners down. With all of our fasteners tightened down we can go ahead and torque to specifications as indicated in the instructions. Alright, with all of our fasteners tightened down that will complete the installation of our Curt hitch part #: c13065 on our 2012 Jeep Grand Cherokee.
Trailer Hitch Installation - 2006 Jeep Grand Cherokee - Hidden Hitch
Today on our 2006 Jeep Grand Cherokee well be installing hidden hitch part number 87752. Note this is what our hitch will look like once its installed. Next well go ahead and give you a couple measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pin to the outer most edge of the bumper is one and a half inches. From the top of the receiver tube to the ground is 17 and a quarter inches. This will assist you with selecting accessories such as a draw bar, a bike rack, or a cargo carrier.
Trailer Hitch Installation - 2006 Jeep Grand Cherokee - Draw-Tite
Today on our 2006 Jeep Grand Cherokee well be installing a draw tight hitch, part number 75338. Note this is what our hitch will look like once its installed. Next well go ahead and give you a couple measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pin hole to the outer most edge of the bumper is one and a half inches. From the top of the receiver tube to the ground is 17 and quarter inches. This will assist you with selecting accessories such as a draw bar, a bike rack, or a cargo carrier.
Trailer Hitch Installation - 2006 Jeep Grand Cherokee - Curt
Today on our 2006 Jeep Grand Cherokee well be installing the Curt hitch part number 13251. This is what our hitch will look once its installed. Next well go ahead and give you a couple measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pin to the outer most edge of the bumper is two inches. From the top of the receiver tube to the ground is 16 and seven eighths inches. This will assist you with selecting accessories such as a draw bar, a bike rack, or a cargo carrier.
