Today on this 2005 Lexus RX 330 were going to install part number 75153 from Draw Tite. Alright this is what the hitch looks like once its installed on the vehicle. Next well give you some measurements that will help you out in some selecting some accessories such as a bicycle rack, a ball mount or a cargo carrier. From the center of the hitch pin to the edge of the bumper is going to be about inch and from the top of the receiver opening down to the ground will be 14 inch. Now Ill go ahead and show you how the hitch is installed. For the first step is to go ahead and remove the tie-down bracket and rubber plugs.
Now when you look at the passenger side, it should be identical on the driver side as well. Lets go and repeat for the driver side. At this point we can go ahead and install the hitch. Now its definitely good idea to have an extra hands to help hold up while you run the hardware into the frame. And when we install a hardware, well make sure that the teeth on the conical tooth washer point towards the hitch.
Alright, now youre gonna leave all your hardware loose so you can move it around to help get the bolts in place. With all the hardware loosely installed, now we can go ahead and snug everything down. Once we have the hitch drawn up to the vehicle, we can go ahead and torque everything as specified in the instructions. There we have it for part number 75153 from Draw Tite. .
Trailer Hitch Installation - 2005 Lexus RX 330 - Hidden Hitch
Today on this 2005 Lexus RX330 we're going to install part number 70778 from Hidden Hitch. Alright, this is what the hitch looks like when it's installed on the vehicle. Next we'll give you some measurements that will help you out in selecting some accessories such as bicycle rack, a ball mount, or a cargo carrier. And we set up our hitch pin to the edge of the bumper it's going to be about 1/4-inch. And from the top of receiver opening down to the ground will be 14-3/4 of an inch. Now I'll go ahead and show you how the hitch is installed.
Trailer Hitch Installation - 2005 Lexus RX 330 - Curt
Today on this 2005 Lexus RX330 we're going to install part number 13530 from Curt. Alright, this is what the hitch looks like when it's installed on the vehicle. Next, we'll give you some measurements that will help you out in selecting some accessories such as a bicycle rack, a ball mount, or a cargo carrier. From the top of the receiver opening down to the ground, it's going to be 14-1/2 inches, and from the center of the hitch pin hole to the edge of a bumper is going to be 2 inches. Now, I'll go ahead and show you how the hitch is installed. So our first step is to go ahead and remove the tie down bracket and rubber plugs.
