Today we are working on a 2005 Chevy Suburban. We will be installing Timbren suspension enhancement system part number TGMRYS4. Our first step is going to be to remove the existing bump stop. Sometimes it will be necessary to actually get a tool in around the bump stop to pry it out. As you can see, ours came out pretty easily. For installation of our new bump stop, we fit it in to the bump stop cup and now we are going to use the vehicle weight to actually push it back in place, using a couple of wood blocks. Now I am going to lower the vehicle weight on to the bump stop. Now we can go ahead and raise the vehicle back up and remove our blocks. Now that we have the driver side installed, I am going to go ahead and repeat the same process on the passenger side. And that completes the installation of our Timbren suspension, part number TGMRYS4.
Today on a 2011 Chevrolet Suburban were going to install part number TGMRYS4 from Timbren. The first thing we need to do is get underneath the vehicle and remove the original bump stop. This will be pretty easy on this particular vehicle. Well just go ahead and grab it and just pull it loose from its fitting. Okay, now well go ahead and show you how the new Timbre spring will go into place. Itll basically push into place and held in like friction like the old one.