Thule Vertex 4 Hitch Bike Rack Review - 2013 Chrysler Town and Country
Today on our 2013 Chrysler Town and Country, well be test fitting the Thule Vertex 4 Bike Carrier, part number TH9029. Now to begin our test fit, well slide the shank of the carrier into the opening of the hitch, align up our pinholes, thread our anti-rattle bolt through the pinhole and tighten with a wrench. Now well go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. There is about ten inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about two inches. With the cradle arms folded down, weve added about 11 inches to the overall length of the vehicle.
Thule Doubletrack Hitch Bike Rack Review - 2013 Chrysler Town and County
Today on our 2013 Chrysler Town and Country, well be test fitting the Thule Doubletrack Platform-Style 2 Bike Carrier, part number TH990XT. To being our test fit, well slide the shank of the carrier into the opening of the hitch, align up our pinholes, thread our anti-rattle bolt through the pinholes and tighten with a wrench. With the platform folded down, we can now have access to our cargo area. To load the bike, well unfold the mast by sliding the grey lever over to the right hand side, put the frame hooks to the top of the mast and well undo the cradle straps. Well set the bike into the wheel cradles, adjust the frame hook tightly against the frame and secure it with the straps. The completes todays test fit for the Thule Doubletrack Platform-Style 2 Bike Carrier, part number TH990XT on our 2013 Chrysler Town and Country.
Swagman XTC2 Wheel Mount Hitch Bike Rack Review - 2013 Chrysler Town and Country
Today on our 2013 Chrysler Town and Country, well be test fitting the Swagman XTC2 2 Bike Carrier, part number S64670. Now to being our test fit, well slide the shank of the carrier into the opening of the hitch, align up our pinholes, thread our anti-rattle bolt through the pinholes and tighten with a wrench. To access the cargo area, well pull the three pins at the base of the carrier to fold the platform and the mast down and this will allow us to have access to our cargo door. To load the bike, well l make sure the mast is in its upright position. Well put the frame hooks to the top of the mast and well undo the straps. Well set the bike into the wheel cradles, adjust the frame hook tightly against the frame and secure it with the straps.
Yakima StickUp 2 Hitch Bike Rack Review - 2013 Chrysler Town and Country
Today on our 2013 Chrysler Town and Country, well be test fitting the Yakima Stickup 2 Bike Carrier, part number Y02420. To begin our test fit, well slide the shank of the carrier into the opening of the hitch, line up our pinholes, thread our anti-rattle bolt through the pinholes and tighten with a wrench. Now well go ahead and go through a few clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 11 inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about two inches. With the platform folded up, weve added about 11 inches to the overall length of the vehicle.
Yakima HighLite 2 Hitch Bike Rack Review - 2013 Chrysler Town and Country
Today on our 2013 Chrysler Town and Country, well be test fitting the Yakima Highlight Aluminum 2 Bike Carrier, part number Y02438. Now to begin our test fit, well slide the shank of the carrier into the opening of the hitch, line up our pinholes, insert our pin through our pinhole and turn the black knob at the bottom of the carrier to engage our anti-rattle device. Now well go ahead and well go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. There is about ten inches of ground clearance. Closest part of the vehicle to the closest part of the carrier is about four inches. With the cradle arms facing down, weve added about nine inches to the overall length of the vehicle. To access the cargo area, well lift up on the red knob located at the bottom of the back of the mast and tilt the mast down.
Yakima DoubleDown Ace Hitch Bike Rack Review - 2013 Chrysler Town and Country
Today on our 2013 Chrysler Town and Country, well be test fitting the Yakima DoubleDown Ace 4 Bike Carrier, part number Y02451. Now to being our test fit, well slide the shank of the carrier into the opening of the hitch, align up our pinholes, insert our pin through our pinhole and tighten down the black knob to engage our anti-rattle device. Well now go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. Theres about 10 inches of ground clearance. The closet part of the vehicle to the closet part of the carrier is about 4 inches. With the cradle arms folded down, weve added about 11 inches to the overall length of the vehicle.
