Today on our 2010 Jeep Compass, well be test fitting part number TH810, the Thule SUP Taxi, Stand Up Paddle board carrier. Thatll begin our test fit. Well place the front carrier over the top load bar, well bring the rubber coated steel strap underneath the load bar and re-secure it to the foot of the front carrier. We can then tighten it down using the gray knob here on the side of the carrier. With the front carrier secured to the vehicle, well go ahead and move to the rear carrier. Again, well place the rear carrier on top of the rear load bar; well bring the rubber coated steel straps underneath the load bar and secure them to the carrier.
We can then tighten them down using the same procedure that we did with the front carrier. And with that, our SUP Taxi is mounted to the vehicle and were ready to load our SUP. And completes our test fit of the of the Thule SUP Taxi part number TH810 on our 2010 Jeep Compass.
Today on this 2012 Jeep Compass were gonna be test fitting the Thule SUP Taxi Stand-Up Paddle Board Carrier part number TH810. To mount the SUP Taxi up on our roof rack, were gonna take half of the carrier and set it up on top of our front load bar. Well take the rubber coated steel strap and fit it around and back into the speed link head. Well use the gray hand knob to tighten it down. Then well then move to the driver side and tighten the strap over there. Well take the second half of the carrier, take it to the rear load bar and repeat the same procedure.