Today on our 2011 Hyundai Accent, we'll be test fitting the Thule Raceway 2 Bike Carrier, part number TH9001. To begin our test fit, we will need to pop the trunk. With that trunk popped, we can go ahead and bring the carrier up and set it in place on our deck lid. We'll then put the two top straps in at the top of the deck lid between the deck lid and the rear window. We can then make them taunt. With the top straps in place, we'll bring the bottom straps down and hook it to the bottom of our deck lid.
We'll also bring those taunt. After making sure that the bike rack is in the correct location as stated by Thule in their instructions, we can go ahead and ratchet down the straps, tightening it to the deck lid. That will secure our bike rack to the vehicle. One thing to remember when loading your bike rack, it is a good idea to make sure that your surface of your deck lid is cleaned and waxed. This will help to protect the paint finish while your bike rack is on the vehicle.
We'll now go ahead and pull the dual arms out and open up the straps to expose our cradle. We can then simply set the bike into the cradles. Bring the straps around and secure it to the bike rack. That's it. Our bike is loaded and we're ready to head on down the road.
That completes our test fit of the Thule Raceway 2 Bike Carrier, part number TH9001, on our 2011 Hyundai Accent.
Today on our 2013 Hyundai Accent well be test fitting the Yakima KingJoe Pro Trunk Mounted 2 Bike Carrier part number Y02624. This trunk mount will be placed on the vehicle right below the license plate but yet still on the trunk door. To begin our test fit well go ahead and set the carrier onto the trunk and position it as specified in the fit guide or the directions. Well then connect the top two hooks to the top of the trunk and the side hooks to the sides of the trunk below the taillight and then the bottom hooks to the bottom of the trunk. Once we get these hooks in place we can go ahead and tighten them down and secure the trunk mounted to the vehicle. Once it is secure, we are ready to load up our bike.
Today on our 2013 Hyundai Accent 4-door Sedan well be test fitting the Thule Raceway 2 Bike Carrier part number TH9001. To fit this trunk carrier to our vehicle we need to set our fid dial setting at number seven so that we have the proper spread of the carriers arms. Well position the rack on top of the vehicles trunk lid. Well secure the clips with the top cables at the top edge of our trunk door. Well secure the bottom cables on the bottom edge of our trunk lid and we need to make sure that the bottom arms are resting on the upper tier of the bumper. With everything in position well use the ratcheting knobs on the ends of the carrier to tighten down our cables.
Today on our 2013 Hyundai Accent, we'll be test fitting the Thule Passage 2-bike carrier trunk mount, part number TH910XT. Before we begin our test fit, we first need to check the Thule fit guide in the included instructions to determine what number our fit dial needs to be at. We'll set the fit dial to 7, according to the fit guide included in the instructions. We'll place the carrier onto the vehicle, putting the top hooks at the top part of the trunk, the side hooks to the side part of the trunk, and the bottom hooks to the bottom part of the trunk. We'll then tighten down the straps to secure the carrier to the vehicle. And now we're ready to load our bike.