Today on our 2012 Toyota Sequoia we'll be test fitting the Thule Parkway, two-bike carrier, part number TH958. Now to begin our test fit we'll simply slide the bike rank shank into the hitch, line up the hitch pinhole and install our anti-rattle bolt. With our bolt tight, our bike rack is secured to the vehicle. Now we'll go ahead and give you a few measurements. Our ground clearance at the bike rack is 17-1/2 inches and from the closest point of the bike rack to the back of the vehicle is four inches. Now we'll go ahead and pull the pin at the bottom of the bike rack mast to bring the mast down and open our cargo door and as you can see we can gain full access opening the cargo door completely with this bike rack.
We are now almost ready to load our bike. We'll need only to open up the cradle straps, exposing our cradle. We'll place the bike into the cradles and bring the straps around securing it to the bike rack and there you have it, our bike is loaded and we are ready to head on down the road. And that completes our test fit of the Thule Parkway, two-bike carrier, part number TH958 on our 2012 Toyota Sequoia.
Yakima SwingDaddy 4 Hitch Bike Rack Review - 2012 Toyota Sequoia
Today on our 2012 Toyota Sequoia, well be test fitting the Yakima SwingDaddy 4 Bike Hitch Mounted Bike Rack, part number Y02422. Now to begin our test fit, well simply place the bike rack shank into the hitch, line up the hitch pin hole and tighten down our anti-rattle bolt. With our anti-rattle bolt tight, our bike rack is secured to the vehicle. Well now go ahead and give you a few measurements. Our ground clearance at the bike rack is 17-1/2 inches and from the closest point of the bike rack to the back of the vehicle is 6 inches. We can now pull the switch at the top of the bike rack mast to bring out our dual arms.
Thule T2 Platform Style Hitch Bike Rack Review - 2012 Toyota Sequoia
Today on our 2012 Toyota Sequoia, well be test fitting the Thule T2 Platform Style Bike Carrier for 2-inch hitches, part number TH916XTR. Now to begin our test fit, well simply slide the bike rack shank into the hitch, line up the hitch pin hole and install and tighten down our anti-rattle bolt. With our bolt tight, our bike rack is secured to the vehicle. Well now go ahead and give you a few measurements. Our bike rack ground clearance is 17 inches and from the closest point of the bike rack to the back of the vehicle is 7 inches. We can now unfold the platform and open our cargo door.
Yakima StickUp 2 Hitch Bike Rack Review - 2012 Toyota Sequoia
Today on our 2012 Toyota Sequoia we'll be test fitting, part number Y02420, the Yakima Stickup, two bike, hitch mounted folding platform style bike rack. Now to begin our test fit we'll simply slide the bike rank shank into the hitch, line up the hitch pinhole and install our anti-rattle bolt. With our bolt tight our bike rack is secured to the vehicle. We'll now go ahead and give you a few measurements. Our ground clearance at the bike rack is 18 inches and from the closest point of the bike rack to the back of the vehicle is six inches. We'll now unfold the platform and open our cargo door.
Yakima Holdup Hitch Bike Rack Review - 2012 Toyota Sequoia
Today on our 2012 Toyota Sequoia we are going to be test fitting the Yakima Holdup two hitch mounted bike rack for two inch hitches, part number Y02433. With our bike rack already pre-assembled and our vehicle equipped with a two-inch hitch, we'll go ahead and slide the bike rack shank directly into the receiver tube of the hitch lining up the hitch pinholes then we'll install and tighten down the anti-rattle bolt and lock. This is what the bike rack will look like on the vehicle in its stored position. Now we'll go ahead and take a few measurements. From the nearest point of the bumper to the nearest point of the bike rack is six inches. With the bike rack in the stored position we add an additional 14 inches to the overall length of the vehicle length and from the lowest point of the bike to the ground is 17-1/2 inches.
Pro Series Eclipse 4 Hitch Bike Rack Review - 2012 Toyota Sequoia
Today on our 2012 Toyota Sequoia we'll be test fitting the Tow Ready, four-bike, hitch mounted bike rack, for two-inch hitches part number 63124. Now to begin our test fit we'll slide our bike rank shank into the hitch, line up the hitch pinhole and install our anti-rattle bolt. With our bolt tight, our bike rack is secured to the vehicle. We'll now go ahead and give you a few measurements. Our ground clearance at the bike rack is 17-1/2 inches and from the closest point of the bike rack to the back of the vehicle is 6-1/2 inches. Now we'll go ahead and pull the pin at the bottom of the bike rack mast to tilt the mast down.
Thule Vertex 4 Hitch Bike Rack Review - 2012 Toyota Sequoia
Today on our 2012 Toyota Sequoia we are going to be test fitting the Thule Vertex four-bike carrier, part number TH9029. Now to begin our test fit we'll simply slide the bike rank shank into the hitch, line up the hitch pinhole and install our anti-rattle bolt. With our bolt tight, our bike rack is secured to the vehicle. Now we'll go ahead and give you a few measurements. Our ground clearance at the bike rack is 18 inches and from the closest point of the bike rack to the back of the vehicle is 4-1/2 inches. We'll now go ahead and pull the hitch switch at the bottom of the mast to bring the mast down and open our cargo door and as you can see we can gain full access to the cargo area with this bike rack.
