Today on our 2000 Lexus RX300 well be test fitting the Thule Parkway 2 bike carrier for 2 inch hitches, part #: TH958. With our bike rack already preassembled and our vehicle equipped with a 2 inch hitch well go ahead and slide the bike rack shank directly into the receiver tube of the hitch lining up the hitch pinhole. Then well install and tighten down the anti-rattle bolt. This is what our bike rack will look like when its installed on the vehicle. As you can see with our anti-rattle bolt tightened down it really takes out any movement between the bike rack and the vehicle. Now well go ahead and give you a few measurements.
From the nearest point of the upright of the bike rack to the nearest point of the bumper is 6 inches. With our bike rack installed it adds an additional 23 inches of overall vehicle length and from the end of the bike rack we have 14 and inches of ground clearance. Now well go ahead and pull the pin at the base of the mast, tilt the bike rack away from the vehicle to gain rear cargo access. As you can see with the bike rack tilted away from the vehicle we can still gain full rear cargo access. Now lets go ahead and close the rear cargo door, well put the mast back up on our bike rack and reinstall the pin.
Next, well go ahead and undo the hold down straps so we can set our bike directly into position. Now with our bike on the rack well go ahead and secure it with the hold down straps. And just like that, in a few simple steps weve gone ahead and secured the bike rack to the vehicle and the bike to the bike rack. Now were ready to hit the road. And that does it for our test fit of the Thule Parkway 2 bike carrier for 2 inch hitches part #: TH958 on our 2000 Lexus RX300..
Thule Hitching Post Pro Hitch Bike Rack Review - 1999 Lexus RX 300
Today on this 1999 Lexus RX300, were going to be test fitting the Thule Hitching Post Pro, Part # TH934XTR. To mount our bike carrier to our vehicle, the first thing we need to do is remove the adapter sleeve which we have already done. Well take the shank of the bike rack and insert it into the receiver tube of our hitch. Well line up the hitch pinholes then well start to tread in our anti rattle bolt and we'll tighten it down with a 3/4 inch wrench. Once we've done that, we're going to check for rear vehicle access. Well remove the pin at the base of the rack and tilt it down.
Thule Hitching Post Pro Hitch Bike Rack Review - 2000 Lexus RX 300
Today on our 2000 Lexus RX300 were going to test fit the Thule Hitching Post Pro, folding and tilting 4 bike carrier for inch and a quarter and 2 inch receiver hitches part #: TH934XTR. With our bike rack already preassembled and our vehicle equipped with a 2 inch hitch we can go ahead and slide the bike rack shank directly into the receiver tube of the hitch, tightening down the anti-rattle bolt. With our anti-rattle bolt tightened down you can see it really takes out any movement between the bike rack and the vehicles. This is what our bike rack will look like once its in the installed and in the stored position. Next, well go ahead and give you a few measurements. From the nearest point of the bumper to the nearest point of the bike rack is 8 inches.
Thule Doubletrack Hitch Bike Rack Review - 2000 Lexus RX 300
Today on our 2000 Lexus RX300 well be test fitting the Thule Double Track platform style 2 bike carrier for inch and a quarter and two inch hitches part #: TH990XT. With our bike rack already preassembled and our vehicle equipped with a two inch hitch we can go ahead and slide the bike rack shank directly into the receiver tube of the hitch lining up the hitch pin hole and installing the anti-rattle bolt. As you can see with the anti-rattle bolt tightened down it really takes out any movement between the bike rack and the vehicle. Next were going to give you a few measurements. From the nearest point of the bumper to the nearest point of the bike rack platform it is 3 inches. With the bike rack installed in the stored position it adds an additional 12 inches to the overall vehicle length and from the lowest point of the bike rack we have 13 and a quarter inches of ground clearance.
Thule Apex 4 Hitch Bike Rack Review - 2000 Lexus RX 300
Today on our 2000 Lexus RX300 well be test fitting the Thule Apex 4 Bike carrier for inch and a quarter and two inch hitches part #: TH9025. With our bike rack already preassembled and our vehicle equipped with the two inch hitch well go ahead and slide the bike rack shank directly into the receiver tube of the hitch, lining up the hitch pinhole using the integrated hitch pin lock. Alright, with that done this is what our bike rack will look like in its stored position. Next well go ahead and give you a few measurements. From the nearest point of the bumper to the nearest point of the base of the bike rack is 3 inches. With our bike rack installed in the stored position we add an additional 13 inches to the overall vehicle length.
Swagman XTC2 Wheel Mount Hitch Bike Rack Review - 2000 Lexus RX 300
Today on our 200 Lexus RX300 well be test fitting the Swagman XTC 2, two bike carrier for inch and a quarter and 2 inch hitches part #: S64670. With our bike rack already preassembled and our vehicle equipped with a 2 inch hitch well go ahead and slide the bike rack shank directly into the receiver tube of the hitch and tighten down the anti-rattle bolt and safety clip. With our bike rack installed this is what itll look like in its stored position. Now well go ahead and well give you a few measurements. From the nearest point of the bumper to the nearest point of the platform of the bike rack is 5 and a half inches. With our bike rack installed it adds an additional 21 inches to the overall vehicle length and from the end of the bike rack we have a 17 and a 3/8 inches ground clearance.
