Today on our 2012 Toyota Highlander, we're going to be test fitting the Thule MOAB Roof Mounted Cargo Basket, part number TH690. To mount the basket, we'll set it up on top of our load bars. We'll make sure that it's spaced evenly on both the driver and passenger's side. Once we have our basket in the position, we'll fit the clamps from the underside and tighten them down from above with the wing nuts. After we've tightened down all four clamps, we can install our covers over the hardware. And with that our basket is installed and we're ready to load up.
That does it for our test fit of the Thule MOAB Roof Mounted Cargo Basket, part number TH690 on our 2012 Toyota Highlander.
Today on our 2012 Toyota Highlander, well be test fitting the Yakima Rocketbox Pro 11 Roof-Mounted Cargo Box, part number Y07193. We already have a roof rack installed on our Highlander, so we can mount the box directly to our crossbars. Well take the box and set it up on top of our crossbars. We do want to make sure that we position it evenly from left to right. Then, well fit the clamps around our crossbars and then open each side of the box to tighten the clamps down. Inside, there are two knobs on each clamp, a black knob which when loosen will allow you to slide the clamp assembly from forward to backward and a red knob which will close the clamp around the crossbars.
Today on our 2012 Toyota Highlander, were going to be test fitting the Yakima Rocketbox Pro 14 Roof-Mounted Cargo Box, part number Y07192. Now, our Highlander is already equipped with a roof rack and were ready to fit the Rocketbox Pro to it. Well take the box and set it up on top of our crossbars. We do want to make sure that its centered from left to right. Well fit the clamps over our crossbars then well open each side of the box to tighten them down. The black knobs on the clamps allow them to slide when loosen, and the red knobs are what will close the claw around the crossbar.