All right today, on this 2011 Chevrolet Aveo, we're going to do a test fit of part number TH934XTR from Thule. Okay A few things to know about this bicycle rack, that it will work with inch and a quarter receiver hitches both class one and class two. However, with a class one receiver hitch, you should only carry just two bikes. This will also work with two inch receiver hitch with the included spacer. And on this particular test fit, we'll be working with a class one receiver hitch. We'll start of our test fit by installing the bike rack into the hitch then we'll go ahead and tighten down the anti rattle bolt, okay Now we'll go ahead and get some clearance measurements.
From the bike rack to the bumper, it's going to be five inches of clearance. Ground clearance is going to be 10 and half inches. Now we'll go ahead and tilt bike rack back and check access to the trunk. Okay, it looks good. Now we'll go ahead and unfold the bike rack so we can load up the bike.
All right, before we load our bike up we'll make sure the straps are out of the way for the we're going to use and let the anti sway part of the cradles is rotated towards the center. When we load up our bike, we'll go ahead and bounce it on the cradles and then swing the anti sway part of the cradle down to the C tube of the bike. We'll strap that down first, then we'll go ahead and run the straps over the top tube. All right And that's all it takes to load up the bike. And with that, that'll finish it for our test fit of part number TH934XTR from Thule on our 2011 Chevrolet Aveo..
SportRack EZ Hitch Bike Rack Review - 2011 Chevrolet Aveo
All right today, on this 2011 Chevrolet Aveo, we're going to do a test fit of part number A30901 from Sport Rack. A couple notes about this bike rack, that it will work with inch and a quarter receiver hitches both class one and class two. This will also work with two inch receiver hitch with the provided spacing. On this particular test fit, we'll be using a class one receiver hitch. So let's start of our test fit by installing the bike rack into the hitch. We'll go ahead and tighten down the anti rattle bolt and put the safety pin on the other side.
Thule Helium Hitch Bike Rack Review - 2011 Chevrolet Aveo
Alright, today on this 2011 Chevrolet Aveo, were going to do a test fit of part number TH970XT from Thule. This is the Helium Aluminum 2-Bike Carrier. A few things to know about this bicycle rack is that it will work with 1 -inch receiver hitches both class 1 and class 2. This will also work with 2-inch receiver hitches with the provided spacer. On this particular car, well be working with a class 1 receiver hitch. Well start off by installing the bike rack into the hitch.
Thule Doubletrack Hitch Bike Rack Review - 2011 Chevrolet Aveo
Alright, today on this 2011 Chevrolet Aveo, were going to do a test fit of part number TH990XT from Thule, the Doubletrack Platform Style Bike Carrier. A few notes about this bicycle rack is that it will work with 1 -inch receiver hitches both class 1 and class 2. This will also work with 2-inch receiver hitches with the provided spacer. And on this car, well be working with a class 1 receiver hitch. Well start off our test fit by installing the bike rack into the hitch then well tighten down the anti-rattle bolt and then install the lock on the other side. Now well go ahead and get some clearance measurements.
Swagman Titan Hitch Bike Rack Review - 2011 Chevrolet Aveo
Today on this 2011 Chevrolet Aveo were gonna do a test fit of part number S63410 from Swagman. This is Titan 4 Bicycle rack. A few things to know about this bike rack is that it will work with 1 -inch receiver hitches both class 1 and class 2. This will also work with 2-inch receiver hitches with the provided spacer. One other thing you need to know is that when you use this bike rack for a class 1 receiver hitch like were going to do today, youre only limited to carrying two bicycles. So well start off our test fit by installing the bike rack into the hitch.
Rhode Gear Highway Hitch Bike Rack Review - 2011 Chevrolet Aveo
Alright, today on this 2011 Chevrolet ave, were gonna do a test fit of part number RG8015220 from Rhode Gear. This is the Highway 2 bike carrier. A few notes about this bike rack is that it will work with 1 -inch receiver hitches both class 1 and class 2. This will also work with 2-inch receiver hitches with the included spacer. On this particular test fit, well be working with the class 1 receiver hitch. First thing well do is go ahead install the bike rack into the hitch and then tighten down the anti-rattle bolt and then put the safety pin on the other side.
