Today we have with us a 2012 Ford Focus and we're going to be test fitting the Thule Gateway 2 trunk-mounted bike carrier, part number TH9006. We already have our carrier setup to fit our vehicle with fit dial being set at number seven. Next, we're going to place the bike rack up on top of our trunk. The upper support is going to sit on the top of our trunk lid. The lower arm of the carrier should be sitting on the upper tier of the bumper. With our bike rack in place, we'll fit the top two hooks on the edge of our trunk near the windshield.
Then we'll fit our bottom hooks down by the bottom arm of the bike rack and our side hooks into the side of the trunk, just below the tail lights. Then we'll tighten down all our straps to secure the bike rack to our trunk. Once we've done that, we can go ahead and begin loading up our bike. We need to make sure that our arms are in a nice level position for carrying our bike. Then we'll fit the bike over the arms of the carrier and into the cradles where we can secure it with the rubber straps.
Once the bike is secured, we're all loaded up and we're ready to hit the road. That does it for our test fit of the Thule Gateway 2 trunk-mounted bike carrier, part number TH9006, on a 2012 Ford Focus.
Today on our 2012 Ford Focus were going to be test fitting the Yakima Super Joe Pro 3 trunk mounted bike rack part #: Y02630. To mount our bike rack we need to adjust the opening according to the instructions. With the bike rack in the proper position were now ready to mount it to our vehicle. Were going to set the upper support frame on top of our trunk and the lower support frame will rest right on the license plate. Well use the upper strap hooks at the top of our trunk right by the windshield. The lower strap hooks will be at the bottom edge of the trunk and well put the side straps on the side of the trunk just below the taillights.
Today we have with us a 2012 Ford Focus and were going to be test fitting the King Joe Pro 2 part #: Y02624. First were going to adjust our King Joe Pro to fit our vehicle, check the instructions for further details on how to make this measurement. Once weve done that we can set the carrier up on top of our trunk. The lower arm of our carriers going to rest on the license plate and the upper arm is going to sit on our trunk lid. Well take the upper strap hooks and place them along the edge of the trunk closest to the windshield. Well place our side hooks just underneath the taillights and the bottom hooks will go at the bottom of our bike rack.
Today we have with us the 2012 Ford Focus and we'll be test fitting the Yakima Quickback 2 trunk-back bike carrier, part number Y02621. To fit our bike carrier onto our vehicle, we're going to set the top legs up on top of our trunk and the bottom legs against the trunk door of our vehicle. We'll fit the front hooks into the edge of trunk next to the windshield. Next well take the side hooks and fit them on the side just below the tail lights. Then the bottom hooks will go on the bottom edge of the trunk. We'll tighten down all our hooks and make sure that the bike rack is steady and secure.
Today we have with us the 2012 Ford Focus and we're going to be test fitting the Thule Raceway 2 trunk-mount carrier, part number TH9001. To fit the Raceway to our vehicle, we need to make sure that fit dial is set at number 7. Once we've done that, we can set the trunk mount rack up on top of our vehicle. The upper arm of our carrier will rest on our trunk and the lower arm of our carrier should be positioned on the upper tier of our rear bumper. We'll place the hooks on the top at the trunk gap right by the rear windshield. Then we'll take the other two hooks and hook them to the bottom of the trunk lid.