Today, we have got with us a 2010 Infinity FX35. We are going to be test fitting the Thule Flat Top ski and snowboard carrier, part number TH92725. Our FX35 already has a full factory roof rack so we are going to mount our Flat Top directly to the factory cross bars. To do this, we will take the first half of the carrier, sit it up on top of our crossbar and feed the speed link strap around the bar and back to the speed link head. Then we will use the hand knobs to tighten down the straps on both sides of the vehicle. Next, we will take the second half and set it up on top of our bar.
We want to make sure it lines up nicely with the front bar and then we will repeat the same procedure with the straps. Once we have done that, we are ready to load up our skis. To do that we will push the buttons on the ends of the carrier and open the jaws. Then, we will take our snowboard and skis, fit them into the carrier and close the carrier around them. With that, we are all loaded up and we are ready to go.
And thats our test fit of the Thule Flat Top ski and snowboard carrier, part number TH92725 on our 2010 Infiniti FX35.
Today on this 2006 Infinity FX35 well be test fitting Thule Universal flat top ski and snowboard carrier part number TH92725. To mount our carrier well take the front half and set up on top of our front cross bar. Well feed the speed links straps around the cross bar, back into the attachment head and tightened them down with the gray knobs on both the driver and passenger side. Well repeat the same procedure with the other half of the carrier over our rear cross bar. With our carrier secure we are ready to load up our skis. Well hit the gray buttons on the end of the carriers to open them up.