Today we have 2012 Toyota Camry and well be testing the Thule Domestique Fork Mount Bike Carrier part number TH513. Weve already got our bike carrier assembled according to the instructions and now were ready to fit it on top of our roof rack. Well place the rack up on top of the bars. Well fit the front clam around our front bar and the rear clamp around the rear and well tighten them down with the included Allen keys. Once weve done that, we can replace the skewer into the head of the bike rack and well be ready to load our bike. Well undo the rear wheel strap and fit the rear wheel of our bike into the tray.
Well place the front forks down on top of the skewer and then secure it. Well move back to the rear and attach our rear wheel strap. With that, our bike is loaded and were ready to get on the road. That does it for our test fit of the Thule Domestique Fork Mount Bike Carrier part number TH513 on our 2012 Toyota Camry. .
Whispbar Roof Mount Bike Rack Review - 2012 Toyota Camry
Today on our 2012 Toyota Camry, well be test fitting the Whisbar Roof Mounted Bike Rack, part number WB-200. Now our vehicle is equipped with the Yakima Round Bar Roof System, so well begin our test fit by placing the round bar adapter onto the crossbars. Well do this by first removing the black strip at the top of the adapter exposing the two silver Allen bolts. Well loosen up the Allen bolts to allow us to put the two clamps on the crossbar. Once the clamp is on we can then replace the bracket inserting the silver bolts through the holes in the brackets and tightening them down with the Allen key. Well then repeat these steps with the other adapter for the rear crossbar.
Thule Echelon Roof Bike Rack Review - 2008 Toyota Camry
Today, on our 2008 Toyota Camry, we'll be test-fitting the Thule Eschelon roof-mounted bike carrier, part number TH518. Now, our Camry's already equipped with the Thule traverse roof rack system, so were ready to load our Eschelon. We'll begin by placing the bike rack on top of our crossbars in a location suitable for us. We'll make sure that the head of the bike rack is directly over the front cross bar where we can then take the rear mount of the Eschelon and make sure if it's over the rear crossbar. We'll then simply run the clamp underneath the crossbar and loosely fasten the wing nut to the bolt. We'll then move forward to the head of the bike rack.
SportRack Nomad Roof Bike Rack Review - 2008 Toyota Camry
Today, on our 2008 Toyota Camry, we'll be installing the SportRack Nomad framed mount bike carrier, part number ABR611. Now, to begin our test-fit, we'll simply place our bike rack on top of our cross bars. We'll make sure that the head of the bike rack is directly over our front cross bar where we can now take our back cross bar and ensure that it's over the rear cross bar. To move it, you'll simply remove the bolts and use any of the pre-existing holes drilled in the bike rack to adjust the rear mount. We'll then go ahead and loosely install out rear mount over the rear crossbar. We'll move back to the front where we use the 2 U bolts and wing nuts to secure the head of the bike rack to the front crossbar.
Yakima FrontLoader Roof Bike Rack Review - 2012 Toyota Camry
Today on our 2012 Toyota Camry, were going to be test fitting the Yakima Frontloader Roof Mounted Bike Carrier, part number Y02103. To fit our bike carrier onto our roof rack, were going to lay it on top of our crossbars. Well fit the front head over our front bar and use the hand nut to tighten it down. Then in the rear, were going to fit the clamp around our crossbar and tighten it down with the wing nut. Once weve done that, were ready to load our bike. Well take the front wheel hoop and push it open.
Yakima ForkLift Roof Mounted Bike Rack Review - 2012 Toyota Camry
Today on our 2012 Toyota Camry, were going to be test fitting the Yakima Fork Lift Roof Mounted Bike Carrier, part number Y02098. To mount our bike carrier up on the roof, first well remove the front skewer and open up the front clamp as well as the rear clamp. Well position the bike rack on top of our crossbars, close the clamps, and tighten them down with the wing nuts. Once weve done that, we can reinstall the skewer upfront and undo our wheel strap in the back. Well lift our bike up and set the rear wheel in the tray on the bike rack. Well then set our front fork into the skewer and secure it using the skewer.
