Today on our 2011 Chevrolet Aveo, well be test fitting part number S64670, the Swagman XTC2. Now to begin our test fit, well simply slide the bike rack shank into the hitch, line up the hitch pinhole and install our anti-rattle bolt. With our bolt tight, our bike rack is secured to the vehicle. Now well go ahead and give you a few measurements. Our ground clearance to the back of the bike rack 13 inches and from the closest point of the bike rack to the back of the vehicle is 3 inches. Now we can go ahead and unfold the platform to check for cargo access.
As you can see, we can get full cargo access with this bike rack. Were not almost ready to load our bike. Well need only to undo the wheel loop straps and make sure that the vertical bar clamps are extended fully. We can then place the bike into the wheel loops and bring the vertical bar up remembering to reinstall the key to keep the bar in to its vertical position. At which part, we can bring the clamp down to carrying it to the bike rack.
Well then move back down to the wheels where well put the straps through and secure them on the other side of the wheel loop. And that does it. Our bike is loaded and were ready to hit the road. And that completes our test fit of part number S64670 the Swagman XTC2 on our 2011 Chevrolet Aveo.
Thule Hitching Post Pro Hitch Bike Rack Review - 2011 Chevrolet Aveo
All right today, on this 2011 Chevrolet Aveo, we're going to do a test fit of part number TH934XTR from Thule. Okay A few things to know about this bicycle rack, that it will work with inch and a quarter receiver hitches both class one and class two. However, with a class one receiver hitch, you should only carry just two bikes. This will also work with two inch receiver hitch with the included spacer. And on this particular test fit, we'll be working with a class one receiver hitch. We'll start of our test fit by installing the bike rack into the hitch then we'll go ahead and tighten down the anti rattle bolt, okay Now we'll go ahead and get some clearance measurements.
SportRack EZ Hitch Bike Rack Review - 2011 Chevrolet Aveo
All right today, on this 2011 Chevrolet Aveo, we're going to do a test fit of part number A30901 from Sport Rack. A couple notes about this bike rack, that it will work with inch and a quarter receiver hitches both class one and class two. This will also work with two inch receiver hitch with the provided spacing. On this particular test fit, we'll be using a class one receiver hitch. So let's start of our test fit by installing the bike rack into the hitch. We'll go ahead and tighten down the anti rattle bolt and put the safety pin on the other side.
Thule Helium Hitch Bike Rack Review - 2011 Chevrolet Aveo
Alright, today on this 2011 Chevrolet Aveo, were going to do a test fit of part number TH970XT from Thule. This is the Helium Aluminum 2-Bike Carrier. A few things to know about this bicycle rack is that it will work with 1 -inch receiver hitches both class 1 and class 2. This will also work with 2-inch receiver hitches with the provided spacer. On this particular car, well be working with a class 1 receiver hitch. Well start off by installing the bike rack into the hitch.
Thule Doubletrack Hitch Bike Rack Review - 2011 Chevrolet Aveo
Alright, today on this 2011 Chevrolet Aveo, were going to do a test fit of part number TH990XT from Thule, the Doubletrack Platform Style Bike Carrier. A few notes about this bicycle rack is that it will work with 1 -inch receiver hitches both class 1 and class 2. This will also work with 2-inch receiver hitches with the provided spacer. And on this car, well be working with a class 1 receiver hitch. Well start off our test fit by installing the bike rack into the hitch then well tighten down the anti-rattle bolt and then install the lock on the other side. Now well go ahead and get some clearance measurements.
Swagman Titan Hitch Bike Rack Review - 2011 Chevrolet Aveo
Today on this 2011 Chevrolet Aveo were gonna do a test fit of part number S63410 from Swagman. This is Titan 4 Bicycle rack. A few things to know about this bike rack is that it will work with 1 -inch receiver hitches both class 1 and class 2. This will also work with 2-inch receiver hitches with the provided spacer. One other thing you need to know is that when you use this bike rack for a class 1 receiver hitch like were going to do today, youre only limited to carrying two bicycles. So well start off our test fit by installing the bike rack into the hitch.
Rhode Gear Highway Hitch Bike Rack Review - 2011 Chevrolet Aveo
Alright, today on this 2011 Chevrolet ave, were gonna do a test fit of part number RG8015220 from Rhode Gear. This is the Highway 2 bike carrier. A few notes about this bike rack is that it will work with 1 -inch receiver hitches both class 1 and class 2. This will also work with 2-inch receiver hitches with the included spacer. On this particular test fit, well be working with the class 1 receiver hitch. First thing well do is go ahead install the bike rack into the hitch and then tighten down the anti-rattle bolt and then put the safety pin on the other side.
