Today on our 2011 Hyundai Santa Fe, well be test fitting the Swagman Titan 4-Bike Carrier part S63410. Now to begin our test fit, well simply install the bike rack shank into the hitch, line up the hitch pinhole and install the anti-rattle bolt. With our bolt tight, this is what the bike rack will look like secured to the vehicle. Now well go ahead and give you a few measurements. Our ground clearance at the bike rack is 13 inches and from the closest point of the bike rack mast to the back of the vehicle is 9 inches. Now well go ahead and pull the hitch switch at the bottom of the bike to tilt our mast down.
We can then open our cargo door. And as you can see, we can gain full access to the cargo area with this bike rack. We can now pull the hitch switch at the top of the bike rack mast and bring out our dual arms where we can undo the straps exposing our cradles. Well then place the bike into the cradles and bring the straps around securing it to the bike rack. And there you have it, our bike is loaded and were ready to hit the road.
Now we do wanna note that we are mounting the bike on the outermost cradle. This is not recommended when transporting one bike. You should mount the bike to the innermost cradles when transporting it by itself. And that completes our test fit of the Swagman Titan 4 Bike Carrier part number S63410 on our 2011 Hyundai Santa Fe.
Yakima HighLite 2 Hitch Bike Rack Review - 2012 Hyundai Santa Fe
Today on our 2012 Hyundai Santa Fe we'll be test fitting the Yakima Highlite aluminum two bike carrier, part number Y02438. Now to begin our test fit we'll slide the shank of the carrier into the opening of the hitch, line up our pin holes, insert the attached pin into the pin hole and turn the black knob to engage our anti-rattle bolt. Now we'll go over some clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 11 1/2 inches of ground clearance. Closest part of the vehicle to the closest part of the carrier at the bottom of the bumper is about 4 inches. With the cradle arms folded down we've added about 10 inches to the overall length of the vehicle measured at the bumper.
Yakima DoubleDown Ace Hitch Bike Rack Review - 2012 Hyundai Santa Fe
Today on our 2012 Hyundai Santa Fe we'll be test fitting the Yakima Doubledown Ace four bike carrier, part number Y02451. Now to begin our test fit we'll slide the shank of the carrier into the opening of the hitch, line up our pin holes, insert the attached pin into the pin hole and turn the black knob to engage our anti-rattle bolt. Now we'll go over some clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 11 inches of ground clearance. Closest part of the vehicle to the closest part of the carrier at the bottom of the bumper is about 5 inches. With the cradle arms folded down we've added about 12 inches to the overall length of the vehicle measured at the bumper.
Thule Vertex 4 Hitch Bike Rack Review - 2012 Hyundai Santa Fe
Today on our 2012 Hyundai Santa Fe we'll be test fitting the Thule Vertex four bike carrier, part number TH9029. Now to begin our test fit we'll slide the shank of the carrier into the opening of the hitch, line up the pin holes, thread our anti-rattle bolt through the pin holes and tighten with a wrench. Now we'll go over some clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 12 inches of ground clearance. Closest part of the vehicle to the closest part of the carrier is about 3 inch at the bottom of the bumper. With the cradle arms folded down we've added about 12 inches to the overall length of the vehicle measured at the bumper.
Thule Apex 4 Swing Hitch Bike Rack Review - 2012 Hyundai Santa Fe
Today on our 2012 Hyundai Santa Fe we'll be test fitting the Thule Apex swing, four bike carrier, part number TH9027. Now to begin our test fit we'll slide the shank of the carrier into the opening of the hitch, line up our pin holes, insert the spring loaded pin through the pin hole and tighten down the knob to engage our anti-rattle device. Now we'll go over some clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 12 inches of ground clearance. Closest part of the vehicle to the closest part of the carrier at the anti-rattle knob is about 1 inch. With the cradle arms folded down we've added about 10 inches to the overall length of the vehicle measured at the bumper.
Thule Apex 4 Hitch Bike Rack Review - 2012 Hyundai Santa Fe
Today on our 2012 Hyundai Santa Fe we'll be test fitting the Thule Apex four bike carrier, part number TH9025. Now to begin our test fit we'll slide the shank of the carrier into the opening of the hitch, line up the pin holes, insert the spring loaded pin into the pin hole and turn the black knob to engage our anti-rattle device. Now we'll go over some clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 12 inches of ground clearance. Closest part of the vehicle to the closest part of the carrier at the anti-rattle knob is about 1 inch. With the cradle arms folded down we've added about 13 inches to the overall length of the vehicle measured at the bumper.
Swagman XTC2 Wheel Mount Hitch Bike Rack Review - 2012 Hyundai Santa Fe
Today on our 2012 Hyundai Santa Fe we'll be test fitting the Swagman XTC 2 two bike carrier, part number S64670. Now to begin our test fit we'll slide the shank of the carrier into the opening of the hitch, line up the pin holes, thread our anti-rattle bolt through the pin holes and tighten with a wrench. Now we'll go over some clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 12 inches of ground clearance. Closest part of the carrier to the closest part of the vehicle here at the rear bumper is about 8 inches. We've added about 24 inches to the overall length of the vehicle measured from the rear bumper.
