Today we have a 2012 Dodge Charger and we're going to be test fitting the Swagman Fork-Down Roof Mounted Bike Carrier. We've already got our carrier assembled and now we're ready to mount it up on our vehicle. To mount the carrier, we'll place the head of the rack on top of our frontload bar. We'll fit the U bolts around our load bar and back through the head of the platform and we'll tighten it down with the wing nuts. Put the front half of our carrier secured, we can move to the back. We'll position the U bolt in the rear of the carrier over our rear load bar and use the clamp bar and the two wing nuts to tighten it down to our rear bar.
Once we've done that, we're ready to load up our bike. We'll undo the wheel strap with the rear of the carrier. We'll pick up our bike, place the rear wheel of the bike into the tray and place the front fork down into our skewer. We'll secure the bike up at the front with the skewer and then we'll move back to the rear and secure the rear wheel with the wheel strap. With that, our bike's all loaded up and we're ready to hit the road.
That does it for our test fit of the Swagman Fork-Down Roof Mounted Bike Carrier, part # S64710.
Thule Domestique Roof Bike Rack Review - 2012 Dodge Charger
Alright, today on this 2012 Dodge Charge, we're going to do a test fit of part number TH513, the Thule Domestique Bike Carrier. We'll start off our test fit with our bike carrier already assembled according to instructions, so all we have to do is put this on our roof. Our Dodge Charger has already been equipped with a roof rack using the Thule AeroBlade system. We'll start our test fit by taking the bike rack and placing it on top of the roof rack. We'll start with the front clamp and then move the rear clamp into place. We'll take a second and make sure the bike rack is sitting where we want to and then we can go ahead and tighten it down for good.
Thule Sidearm Roof Bike Rack Review - 2012 Dodge Charger
Today we have with us the 2012 Dodge Charger and we'll be test fitting the Thule Sidearm Roof Mounted Bike Carrier part # TH594XT. We already have our bike carrier assembled and we're ready to mount it up on top of our vehicle. We'll place the head of the bike carrier over our frontload bar. We'll use the two clamps with the wing nuts to tighten it down. And the rear, we'll fit the rear clamp around the rear bar and again we'll use the wing nuts to tighten clamp down. With our bike rack secured on the roof rack, we're ready to load it up.
Thule Echelon Roof Bike Rack Review - 2012 Dodge Charger
All right, today on this 2012 Dodge Charger, we're going to do a test fit of part # TH518 the Thule Echelon Roof Mounted Bike Rack. Okay, to start off or test it, we'll have our bike rack assembled according to the instructions so all I have to do is put up on the roof rack. We'll lay the bike rack on the crossbar first then we'll slide the clamp underneath and around the little bar. Then we can tighten down two Allen screws. Once we have everything loose and installed, we'll go ahead move the bike rack into position that we want and make sure it's centered on the vehicle. When bike rack lined up in center, we can go ahead and tighten it down for good.
SportRack Nomad Roof Bike Rack Review - 2012 Dodge Charger
Today on this 2012 Dodge Charger, we're going to be test fitting the Sportrack Nomad Roof Mounted Bike Carrier part # ABR611. To mount the carrier up on our vehicle, we'll place the head of a bike rack on top of our frontload bar. We'll fit the U bolts around the underside of our load bar and we'll tighten down with the wing nuts on top. In the rear, we'll fit the rear clamp around our rear load bar and we'll again use the wing nuts to tighten it down. Once we've done that, we're ready to load our bike. First we'll undo the wheel straps sat either end of the bike carrier.
RockyMounts TieRod Roof Bike Rack Review - 2012 Dodge Charger
All right, today this 2012 Charger, we're going to do a test fit of part # RKY1014 the RockyMounts TieRod Bike Carrier. We're going to start with our test fit with the bike rack assembled according to instructions. So we're going to simply place it on a roof rack and begin our test fit. We'll begin our test fit by installing the carrier on the front crossbar and make sure the straps wrap around from underneath and into the clip in the front. With that loosely attached, we'll go ahead and run the clamp in the rear around the back crossbar and then tying it down but still keeping it loose so we can move it around. Now, I'll take a second and make sure the bike rack is centered with the vehicle before tightening it down for good.
