Today we have with us the 2012 Nissan Versa and we'll be test fitting the Sportrack Nomad Roof Mounted Bike Carrier part number ABR611. To mount the carrier to our roof rack we'll set it up on top of our load bars. We'll fit the U bolts and wing nuts around our front load bar at the head of the bike rack and we'll tighten it down. We'll move to the rear load bar and use the clamp, bolts and wing nuts to secure the rear of the bike rack. Once we've done that we can ready to load our bike. We want to make sure that the wheel straps at the front and back of the wheel tray are open.
We'll pick up our bike and set it down in the wheel tray. We'll lift the frame mount up and clamp it around the frame of our bike rack. Once we've done that we can use the wheel straps to secure the front and rear wheels. And with that our bike is loaded up and we're ready to hit the road. That does it for our test fit of the Sportrack Nomad Roof Mounted Bike Carrier part number ABR611 on our 2012 Nissan Versa..
Yakima FrontLoader Roof Bike Rack Review - 2012 Nissan Versa
Today, on our 2012 Nissan Versa we're going to be test fitting the Yakima FrontLoader roof-mounted bike carrier, part number Y02103.To fit this bike carrier up on top of our vehicle, we're going to lay it on top of our cross bars. We'll fit the front clamp at the head of the bike rack around our front cross bar and we use the hand knob to tighten it down.We'll move to the rear cross bar and fit the clamp around our rear bar and use the T-bolt and wing nut to tighten down the rear clamp.One we have done that our bike rack is secured to our roof rack and we're ready to load up our bike.To load our bike, we're going to make sure that the wheel strap at the rear of the carrier is open. We're also going to lay open the front hoop of the bike carrier.We'll pick up our bike, place the rear wheel in the wheel tray, and place the front wheel in the wheel hoop. We'll bring the rear wheel hoop behind the tire and hold it snug against the backside of the tire.We'll use the red hand knob to tighten down the wheel hoops and secure the bike by the front wheel.With that done, we'll move to the back and use the wheel strap to secure the rear wheel.After both wheels are secured, our bike is loaded up and we're ready to hit the road.That does it for our test fit of the Yakima FrontLoader roof-mounted bike carrier, part number Y02103, on our 2012 Nissan Versa.
Yakima ForkLift Roof Mounted Bike Rack Review - 2012 Nissan Versa
Today, we have a 2012 Nissan Versa and we'll be test fitting the Yakima ForkLift roof-mounted bike carrier, part number Y02098.To fit our bike rack to the roof rack, we'll place it up on top of our cross bars.We'll fit the front clamp around the front cross bar and tighten it down with the wing nut.Once we have done that, we can slide the cap back into place and re-insert our skewer.At the back, we'll fit the clamp around the rear cross bar and again use the T-bolt and wing nut to tighten it all down.Once we have the bike rack secured to our roof rack we'll be ready to load up to our bike. We want to make sure that the wheel strap at the end of the bike track is open.We'll lift up our bike, place the wheel in the wheel tray and fit the front fork down into the skewer.We'll secure the bike by the skewer first, then we'll move back and secure the rear wheel with the wheel strap, and with that our bike is all loaded up and we're ready to get on our way.That does it for our test fit of the Yakima ForkLift roof-mounted bike carrier, part number Y02098, on our 2012 Nissan Versa.
Thule Sidearm Roof Bike Rack Review - 2012 Nissan Versa
Today, on our 2012 Nissan Versa well test fitting the Thule Sidearm roof mounted bike carrier, part number TH594XT. To fit the bike rack to our roof rack were going to set it up on top of our load bars. Well fit the front clamps around our front load bar and tighten it down with the included wing nuts. Well do the same with the rear clamp over our rear load bar. Once weve done that, we can prepare to load a bike. Well open up the sidearm and extend the ratcheting hook all the way out, and well also open up the wheel strap at the back of the wheel tray.
Swagman Fork Down Roof Bike Rack Review - 2012 Nissan Versa
Today, we have with us a 2012 Nissan Versa and were going to be test fitting the Swagman ForkDown roof mounted bike carrier, part number S64710. To secure this bike carrier to our roof rack, well set the head of the bike rack on top of our front load bar. Well use the included U-bolts and wing nuts to tighten down the front clamp around our front load bar. In the rear, we use the U-bolt clamping plate and wing nuts to again secure the rear of the bike rack to our roof rack on our vehicle. With our bike rack secure, we can load up a bike. Well take our bike and place the wheel of the bike into the wheel tray.
RockyMounts PitchFork Roof Bike Rack Review - 2012 Nissan Versa
Today, we have with us a 2012 Nissan Versa and well be test fitting the RockyMounts PitchFork roof-mount bike carrier, part number RKY0438.To mount the carrier to our roof rack we need to fit clamp around our front cross bar. Well use the included Allen key to tighten down the front clamp, and then we can re-install our skewer and cover. To secure the bike rack in the rear well fit the rear plastic clamp around our cross bar and use the wing nut to tighten it down. With our bike rack secured, we can load up a bike. We need to make sure that our rear wheels strap is undone and at the rear of the wheel tray. Well pick up our bike, fit the wheel into the wheel tray, and then drop the front fork down into the skewer.Well secure the bike at the front fork first, and then well move back and use the wheel strap in the rear.
