Today on this 2011 Jeep Grand Cherokee, were going to do a test fit of part number A30901 from SportRack. A few notes to know about this bicycle that it will work with 1-1/4-inch receiver hitches both class 1 and class 2. This will also work with a 2-inch receiver hitch with the included spacer, and thats what were working with today on our Jeep. Well go ahead and start up our test fit by installing the bike rack into the hitch. Well tighten down the anti-rattle bolt and then install the safety pin on the other side. Alright, now Ill go ahead and unfold the bike rack and well go ahead and get some clearance measurements.
From the bike rack to the bumper as the closest point will be 8-1/4 inches. Ground clearance is going to be 18-1/4 inches. Now, well go ahead and take the center post of the bike rack lower out of our way and well go ahead and check access to the back of the Jeep. Alright, that looks good. Now, well go ahead and load up the bike.
What well do first is make sure the straps are out of the way for the wheel loops and that the clamp on the center post is raised at the very top. Then we can go ahead and load up our bike. When we load up our bike, well bring the center post up and bring the clamp down at the top tube and make sure and its pinned down at the bottom. Make sure everything is tight and then we can go ahead and install the straps for the wheels. Okay, and thats the few steps that are needed to load up the bike.
And with that, that will finish it for our test fit of part number A30901 from SportRack on our 2011 Jeep Grand Cherokee.
Thule T2 Platform Style Hitch Bike Rack Review - 2012 Jeep Grand Cherokee
Today on our 2012 Jeep Grand Cherokee well be test fitting the Thule T2 platform style two bike carrier, part number TH916XTR. To begin our test fit, slide the shank of the carrier into the opening of the hitch, line up our pin holes, thread our anti-rattle bolt through the pin holes and tighten with a wrench. Now well go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. Theres about 13 inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about one and a half inches. With the platform folded up weve added about 12 inches to the overall length of the vehicle.
Thule Apex 4 Swing Hitch Bike Rack Review - 2012 Jeep Grand Cherokee
Today on our 2012 Jeep Grand Cherokee well be test fitting the Thule Apex Swing four bike carrier, part number TH9027. To begin our test fit, slide the shank of the carrier into the opening of the hitch, line up our pin holes, insert our pin through our pin holes and turn the black knob located at the back of the carrier to engage our anti-rattle device. Now well go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. Theres about 13 inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about one and a half inches. With the cradle arms folded down weve added about three inches to the overall length of the vehicle.
Yakima DoubleDown Ace Hitch Bike Rack Review - 2012 Jeep Grand Cherokee
Today on this 2012 Jeep Grand Cherokee will be test fitting the Yakima DoubleDown Ace 4 Bike Carrier, part number Y02451. To begin our test fit, we'll take the bike carrier and into the shaft into the hitch, lining up the pinhole. Take the red pin and enter it into the pinhole, then turn the black knob into the back of the bike carrier to engage the anti-rattle device. Now, we'll go over some clearance measurements to see how the bike carrier and the vehicle fit together. There are 11 inches of ground clearance from the ground to the bottom of the bike carrier. There are 6 inches from the closest part of the carrier to the closest part of the vehicle and we've added 15 inches to the overall length of the vehicle.
Kuat NV Hitch Bike Rack Review - 2012 Jeep Grand Cherokee
Today on this 2012 Jeep Grand Cherokee, we'll be test fitting the Kuat NV Aluminum 2 Bike Carrier, part number N101. To begin our test fit, we'll take the bike carrier and insert the shaft into the hitch, lining up the pin hole, then turn the black knob on the back of bike carrier to engage the anti-rattle device. Lastly, secure it with the lock. Now, we'll go over some clearance measurements to see how the bike carrier and the vehicle fit together. When the bike rack tilted up, there are 12-1/2 inches of ground clearance from the ground to the bottom of the bike carrier. There are 3 inches from the closest part of the carrier to the closest part of the vehicle and we've added 15 inches to the overall length of the vehicle.
Yakima HighLite 2 Hitch Bike Rack Review - 2012 Jeep Grand Cherokee
Today, on our 2012 Jeep Grand Cherokee, were going to be test fitting the Yakima HighLite aluminum hitch-mounted bike carrier, part number Y02438. To fit the carrier to our vehicle, well insert the shank into the receiver tube of our hitch. Well line up the pin holes and then use the hand knob to tighten the anti-rattle device. Then, well take our security pin and push it through our hitch into the bike rack. Next, well check for rear vehicle access. Well use the pull pin at the base of the bike rack to tilt it down so that we can open the cargo door of our Grand Cherokee and make sure we can still access the cargo area.
Softride Dura Hitch Bike Rack Review - 2012 Jeep Grand Cherokee
Today on our 2012 Jeep Grand Cherokee, were going to be test fitting the Soft Ride Dura parallelogram bike rack, part number SR26247. To mount this bike rack to our vehicle, well insert the shank into the receiver tube of our hitch. Well line up the hitch pin holes and then well thread in our anti-rattle bolt and tighten it down using a wrench. Well slip the lock over the bolt to secure the bike rack to our vehicle. Next, were going to check for rear vehicle access. Well pull the release pins so that we can tilt the bike rack down and away from the vehicle.
