Today on this 2010 Chevy Aveo were going to do a test fit of part number a30901 from SportRack, this is their 2 bike easy mounted hitch rack. One quick note, this bike rack will work with 1-1/4 hitches class one and class 2, and also will work with 2 receiver hitches with the included bushing. Well start off by installing the bike rack into the hitch. We will tighten down the anti rattle bolt and put the clip on the other end. We will use a wrench to tighten it down. Next well give you some measurements to give you an idea of clearance between the bicycle rack and the car, and the bicycle rack and the ground.
The closest point to the bumper is going to be 5 and it looks like the ground clearance will be 11. Alright now well go ahead and fold the bike rack and give you one more measurement at the very end. We pull out the two key pins, and fold it and the reinstall the pins in the matching holes, and the measurement at the end will be 16 Alright now I can go ahead and check for access to the back of the car. Okay looks like that clears the rack. Okay next well go ahead and load up a bike, what we will do first is take the center post and pull it out of the way, and then install our bike.
Once our bike is in place, take the post, put it back up, put the clamp over the top tube, and then well go ahead and put our pin back at the bottom, and then we can go ahead and do our wheel straps. In a few easy steps our bike is already loaded up and ready to go, and with that that will finish it for our test fit of part number a30901 from SportRack the 2 bike easy mounted rack on our 2010 Chevy Aveo. .
Questions and Comments about this Video
What is the weight limit for SportRack EZ Hitch Bike Rack Review - 2010 Chevrolet Aveo Part number a30901
comment by: Patrick S - 1/12/2013
The SportRack EZ, part A30901, can handle two bikes at a total of 90 pounds.
Patrick B - 1/22/2013Thule Hitching Post Pro Hitch Bike Rack Review - 2011 Chevrolet Aveo
All right today, on this 2011 Chevrolet Aveo, we're going to do a test fit of part number TH934XTR from Thule. Okay A few things to know about this bicycle rack, that it will work with inch and a quarter receiver hitches both class one and class two. However, with a class one receiver hitch, you should only carry just two bikes. This will also work with two inch receiver hitch with the included spacer. And on this particular test fit, we'll be working with a class one receiver hitch. We'll start of our test fit by installing the bike rack into the hitch then we'll go ahead and tighten down the anti rattle bolt, okay Now we'll go ahead and get some clearance measurements.
SportRack EZ Hitch Bike Rack Review - 2011 Chevrolet Aveo
All right today, on this 2011 Chevrolet Aveo, we're going to do a test fit of part number A30901 from Sport Rack. A couple notes about this bike rack, that it will work with inch and a quarter receiver hitches both class one and class two. This will also work with two inch receiver hitch with the provided spacing. On this particular test fit, we'll be using a class one receiver hitch. So let's start of our test fit by installing the bike rack into the hitch. We'll go ahead and tighten down the anti rattle bolt and put the safety pin on the other side.
Thule Helium Hitch Bike Rack Review - 2011 Chevrolet Aveo
Alright, today on this 2011 Chevrolet Aveo, were going to do a test fit of part number TH970XT from Thule. This is the Helium Aluminum 2-Bike Carrier. A few things to know about this bicycle rack is that it will work with 1 -inch receiver hitches both class 1 and class 2. This will also work with 2-inch receiver hitches with the provided spacer. On this particular car, well be working with a class 1 receiver hitch. Well start off by installing the bike rack into the hitch.
Thule Doubletrack Hitch Bike Rack Review - 2011 Chevrolet Aveo
Alright, today on this 2011 Chevrolet Aveo, were going to do a test fit of part number TH990XT from Thule, the Doubletrack Platform Style Bike Carrier. A few notes about this bicycle rack is that it will work with 1 -inch receiver hitches both class 1 and class 2. This will also work with 2-inch receiver hitches with the provided spacer. And on this car, well be working with a class 1 receiver hitch. Well start off our test fit by installing the bike rack into the hitch then well tighten down the anti-rattle bolt and then install the lock on the other side. Now well go ahead and get some clearance measurements.
Swagman Titan Hitch Bike Rack Review - 2011 Chevrolet Aveo
Today on this 2011 Chevrolet Aveo were gonna do a test fit of part number S63410 from Swagman. This is Titan 4 Bicycle rack. A few things to know about this bike rack is that it will work with 1 -inch receiver hitches both class 1 and class 2. This will also work with 2-inch receiver hitches with the provided spacer. One other thing you need to know is that when you use this bike rack for a class 1 receiver hitch like were going to do today, youre only limited to carrying two bicycles. So well start off our test fit by installing the bike rack into the hitch.
Rhode Gear Highway Hitch Bike Rack Review - 2011 Chevrolet Aveo
Alright, today on this 2011 Chevrolet ave, were gonna do a test fit of part number RG8015220 from Rhode Gear. This is the Highway 2 bike carrier. A few notes about this bike rack is that it will work with 1 -inch receiver hitches both class 1 and class 2. This will also work with 2-inch receiver hitches with the included spacer. On this particular test fit, well be working with the class 1 receiver hitch. First thing well do is go ahead install the bike rack into the hitch and then tighten down the anti-rattle bolt and then put the safety pin on the other side.
