Today, on our 2012 Jeep Grand Cherokee were going to be test fitting the Rhino Rack four-bike carrier for 2-inch hinges, part number RBC038. To mount our carrier to the vehicle, first well insert the shank of the carrier into the receiver tube of our hitch then well thread-in our anti-rattle bolt and tighten it down using a wrench and then secure it with a lock. Next, well check for rear vehicle access. Well remove the pin at the base of the bike rack and tilt it down. Well open the cargo door for Grand Cherokee to make sure we can still access the cargo area. Now, tilt the bike rack back up and take some clearance measurements.
Weve got about 12-3/4 inches of ground clearance from the bottom of the bike rack to the ground. We have about 4-1/2 inches of space between the closest part of our bike rack and the closest part of our vehicle. In total, weve added about 12 inches of length to the rear of our vehicle. Now, we remove the pin at the top of the bike rack to fold the arms out. In preparation to load the bike, well undo the rubber straps at the cradles closest to the vehicle.
Well pick up our bike and fit it over the arms of the bike rack and set it down in the cradles. Then, well use the rubber straps to secure the bike to the carrier. With that done, our bike is all loaded up and were ready to hit the road. Thats it for our test fit of the Rhino Rack four-bike carrier for 2-inch hinges, part number RBC038 on our 2012 Jeep Grand Cherokee.
Thule T2 Platform Style Hitch Bike Rack Review - 2012 Jeep Grand Cherokee
Today on our 2012 Jeep Grand Cherokee well be test fitting the Thule T2 platform style two bike carrier, part number TH916XTR. To begin our test fit, slide the shank of the carrier into the opening of the hitch, line up our pin holes, thread our anti-rattle bolt through the pin holes and tighten with a wrench. Now well go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. Theres about 13 inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about one and a half inches. With the platform folded up weve added about 12 inches to the overall length of the vehicle.
Thule Apex 4 Swing Hitch Bike Rack Review - 2012 Jeep Grand Cherokee
Today on our 2012 Jeep Grand Cherokee well be test fitting the Thule Apex Swing four bike carrier, part number TH9027. To begin our test fit, slide the shank of the carrier into the opening of the hitch, line up our pin holes, insert our pin through our pin holes and turn the black knob located at the back of the carrier to engage our anti-rattle device. Now well go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. Theres about 13 inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about one and a half inches. With the cradle arms folded down weve added about three inches to the overall length of the vehicle.
Yakima DoubleDown Ace Hitch Bike Rack Review - 2012 Jeep Grand Cherokee
Today on this 2012 Jeep Grand Cherokee will be test fitting the Yakima DoubleDown Ace 4 Bike Carrier, part number Y02451. To begin our test fit, we'll take the bike carrier and into the shaft into the hitch, lining up the pinhole. Take the red pin and enter it into the pinhole, then turn the black knob into the back of the bike carrier to engage the anti-rattle device. Now, we'll go over some clearance measurements to see how the bike carrier and the vehicle fit together. There are 11 inches of ground clearance from the ground to the bottom of the bike carrier. There are 6 inches from the closest part of the carrier to the closest part of the vehicle and we've added 15 inches to the overall length of the vehicle.
Kuat NV Hitch Bike Rack Review - 2012 Jeep Grand Cherokee
Today on this 2012 Jeep Grand Cherokee, we'll be test fitting the Kuat NV Aluminum 2 Bike Carrier, part number N101. To begin our test fit, we'll take the bike carrier and insert the shaft into the hitch, lining up the pin hole, then turn the black knob on the back of bike carrier to engage the anti-rattle device. Lastly, secure it with the lock. Now, we'll go over some clearance measurements to see how the bike carrier and the vehicle fit together. When the bike rack tilted up, there are 12-1/2 inches of ground clearance from the ground to the bottom of the bike carrier. There are 3 inches from the closest part of the carrier to the closest part of the vehicle and we've added 15 inches to the overall length of the vehicle.
Yakima HighLite 2 Hitch Bike Rack Review - 2012 Jeep Grand Cherokee
Today, on our 2012 Jeep Grand Cherokee, were going to be test fitting the Yakima HighLite aluminum hitch-mounted bike carrier, part number Y02438. To fit the carrier to our vehicle, well insert the shank into the receiver tube of our hitch. Well line up the pin holes and then use the hand knob to tighten the anti-rattle device. Then, well take our security pin and push it through our hitch into the bike rack. Next, well check for rear vehicle access. Well use the pull pin at the base of the bike rack to tilt it down so that we can open the cargo door of our Grand Cherokee and make sure we can still access the cargo area.
Softride Dura Hitch Bike Rack Review - 2012 Jeep Grand Cherokee
Today on our 2012 Jeep Grand Cherokee, were going to be test fitting the Soft Ride Dura parallelogram bike rack, part number SR26247. To mount this bike rack to our vehicle, well insert the shank into the receiver tube of our hitch. Well line up the hitch pin holes and then well thread in our anti-rattle bolt and tighten it down using a wrench. Well slip the lock over the bolt to secure the bike rack to our vehicle. Next, were going to check for rear vehicle access. Well pull the release pins so that we can tilt the bike rack down and away from the vehicle.
