All right, today, on this 2010 Lexus RX350 were going to do a test fit of part number N101 from Kuat. Well start off our test fit by installing the bike rack into the hitch. Then, well install the locking hitch pin. Then, well go ahead and tighten down the anti-rattle knob. Then, well go ahead and unfold the bike rack and get a couple of clearance measurements.Ground clearance is going to be 14 inches. Now well go ahead and check for access to the back of the vehicle.
All right, that looks good. Now we can go ahead and load up a bike. First thing we want to make sure the clamp for the front wheel is pulled up and extended out and that the straps for the back wheel is loosened up. Well go ahead and load our bike into place. Our front wheel will go into the wheel loop.
Well go ahead and bring the clamp up and down to the front wheel as close to the fork as possible. And then, well go ahead and run our strap through the back wheel. Thats all it takes to load up a bike. We have our bike loaded up. We can activity take the bike rack and tilt it away from the vehicle a little bit more and well go ahead and check for access to the back of the vehicle.
Ok, that looks good. With that, thatll finish it for our test fit of part number N101 from Kuat on our 2010 Lexus RX350.
Yakima SwingDaddy 4 Hitch Bike Rack Review - 2010 Lexus RX 350
Alright, today on this 2010 Lexus RX350, were going to do a test fit of part number Y02422 from Yakima. This is our SwingDaddy Bicycle Rack. One thing to know about this bicycle rack, that it is designed for 2-inch receiver hitches only. First thing well do our test fit is tighten down the anti-rattle bolt and then install the lock on the other side. And then well go ahead and get a couple of clearance measurements. Alright, from the closest point of the bicycle rack to the bumper is going to be 2 inches.
Thule Vertex 4 Hitch Bike Rack Review - 2010 Lexus RX 350
Today, on this 2010 Lexus RX350 were going to do a test fit of part number TH9029 from Thule. This is the Vertex bike carrier. A few things to know about this bike rack, that it will work with inch-and-a-quarter receiver hitches, both class I and class II. When you do use this bicycle rack with a class I receiver hitch, youre limited to carrying just two bicycles. This will also work with a 2-inch receiver hitch with the included spacer, and thats what were working with today. Well start off our test fit by installing the bike rack into the hitch, and then well go ahead and tighten down the anti-rattle bolt.
Thule Parkway 2 Hitch Bike Rack Review - 2010 Lexus RX 350
Today on this 2010 Lexus RX350 we're going to do a test fit of part number TH958 from Thule. This the Parkway bicycle rack.One thing to know about this bicycle rack is it is designed for 2-inch receiver hitches only.Now I'll start off our test fit by installing the bike rack into the hitch. Then, we'll go ahead and tighten down the anti-rattle bolt, and then we'll get a couple of clearance measurements.From the bike rack security loop to the bump looks like about 1-1/4 inches. Ground clearance looks like about 14 inches.Now go ahead and tilt the the bike rack out of the way and check for access to the back of the vehicle. That looks good.Now we'll go ahead and load up the bike.First thing we'll do is make sure the straps are out of the way on the cradles we're going to use. Then, we'll load up our bike, balance it out, and then re-install the straps over the top tube of the bike.That's all it takes to load up a bike.
Thule Doubletrack Hitch Bike Rack Review - 2010 Lexus RX 350
Today, on this 2010 Lexus RX350 we're going to do a test fit of part number TH990XT from Thule. This is their doubletrack bicycle rack.A few things to know about this bike rack, that will work with 1-1/4 receiver hitches, both class I and class II. This will also work with 2-inch receiver hitches with the included spacer and that's what we'll be working with today.We'll start off our test fit by installing the bike rack into the hitch. Then, we'll tighten down the anti-rattle bolt and install the lock on the other side.Then, we'll go ahead and get a couple of clearance measurements. From the bike rack to the hatch clearance is going to be 4-1/2 inches. Ground clearance is going to be 13-1/2 inches.Now, we'll go ahead and tilt the bicycle rack out of the way and check for access to the back of the vehicle.
Swagman XTC2 Wheel Mount Hitch Bike Rack Review - 2010 Lexus RX 350
All right, today, on this 2010 Lexus RX350 were going to do a test fit of part number S64670 from Swagman. A couple things to know about this bicycle rack, that it will work with inch-and-a-quarter receiver hitches, both class I and class II. This will also work with 2-inch receiver hitches with the included spacer and thats what were working with today. Well start off our test fit by installing the bicycle rack into the hitch. Well go ahead and tighten down the anti-rattle bolt, and then install the safety pin on the other side. And then, well go ahead and get a couple of clerarance measurements.
