Today on our 2012 Ford F-150 Four Door we're going to show you the Curt Tri-Ball Mount, part number C45001. This is the ball mount with three different ball sizes fixed to it. A 1-7/8 inch, a 2-inch and a 2-5/16 inch ball. But before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height we'll measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 18-1/2 inches.
When we install the ball mount to use the 2-5/16 ball we measure 7 inches from the center of the hitch pin hole to the center of the ball. When we flip it over you see that the two-inch ball or the 1-7/8 inch ball, we measure 8-1/2 inches from the center of the hitch pin hole to the center of the ball. There is no rise or drop on this ball mount so whatever your hitch height measurement is going to be is what the ball height will be. And that's it for our test fit of the current tri-ball mount, part number C45001.
Hidden Hitch Ball Mount with 4 Inch Drop Review - 2012 Ford F-150
Today on our 2012 Ford F150 we'll be test fitting the Hidden Hitch Ball Mount 4-3/4" rise, or 6" drop, rated at 6,000 pounds, part number 80240. Now before we begin our test fit, we'll first need to obtain the hitch height of our vehicle, which is the measurement from the ground to the inside top of the receiver tube. We'll get a measurement of 19-1/2". Now to begin our test fit, in the drop position, we'll slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pin holes, and secure it with the clip on the other side. We'll then measure from the ground to the top of the ball platform, and we'll get a measurement of 13-1/2". Note that this measurement may vary due to tire size, hitch style, or after-market accessories.
Diversi-Tech Adjustable Ball Mount Review - 2012 Ford F-150
Today on our 2012 Ford F-150, we'll be test fitting the Diversi-Tech Self-Locking Adjustable Aluminum Ball Mount for 2-inch hitches with a 6-inch drop or 6-inch rise rated at 10,000 pounds, part number DTALBM6600. Now before we begin our test fit, we'll first need to obtain a hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. We'll get a measurement of 19-1/2 inches. This measurement may vary due to tire size, hitch style, or aftermarket accessories. To begin our test fit in the drop position, we'll slide the shank of the ball mount into the opening of the hitch.
Curt Multi-Ball Adjustable Ball Mount Review - 2012 Ford F-150
Today on our 2012 Ford F150 we'll be test fitting a Curt Multi-Ball Adjustable Ball Mount for 2" hitches, part number D900. Now before we begin our test fit, we'll first need to obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. Our measurement is 19-1/2". This measurement may vary due to tire size, hitch style, or after-market accessories. Now to begin our test fit, in the rise position, we'll slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pin holes, and secure it with the clip on the other side.
Draw-Tite Ball Mount Review - 2013 Ford F-150
Today on our 2013 Ford F150 well be test fitting the Draw Tite ball mount for two inch hitches, part number 2923. Before we begin our test fit, we will first need to obtain a hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. Our measurement is 19 inches. This measurement may vary due to tire size and aftermarket accessories. Now well go ahead and slide the shank of the ball mount into the opening of the hitch in the drop position, align up our pin holes and secure it with the pin and clip.
Curt Tri-Ball Mount Review - 2013 Ford F-150
Today on our 2013 Ford F150 well be test fitting the Curt Tri ball mount for two inch hitches, part number C45001. Now before we begin our test fit well first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. Hitch height may vary due to tire size and aftermarket accessories. Our measurement is 19 inches. Well then slide the shank of the ball mount into the opening of the hitch, align up our pin holes and secure it with the pin and clip.
