Today on our 2012 Jeep Liberty, we'll be test fitting the Curt 20x60 folding aluminum cargo carrier, part number C18100. Now to begin our test fit, we'll simply slide the cargo carrier shank into the hitch, line up the hitch pin hole and install our hitch pin. And with that, our cargo carrier is secured to the vehicle. Now we'll go ahead and give you a few measurements. With the cargo carrier in the stored position, it's five inches from the back of the vehicle, and our ground clearance at the cargo carrier is 15 inches. We'll now go ahead and pull the pin at the bottom of the cargo carrier to fold our platform down, where we can give you a few more measurements.
Now with the platform down, the closest point of the cargo carrier to the back of the vehicle is 13 inches, and the cargo carrier will add an additional 30 1/2 inches of overall length to the vehicle. Now our tailpipe on the vehicle is on the passenger rear, and is approximately 16 inches from the cargo carrier. So there will be little to no heat transfer while you're driving down the road. And that completes out test fit of part number C18100, the Curt 20x60 folding aluminum cargo carrier, on our 2012 Jeep Liberty.
Curt Folding Hitch Cargo Carrier Review - 2012 Jeep Liberty
Today on our 2012 Jeep Liberty, we'll be test fitting the Curt 24x60 Folding Cargo Carrier for 2-inch hitches, part number C18132. Now to begin our test fit, we'll slide the cargo carrier shank into the hitch using the included adapter for the 2-inch hitches. We'll then line up the hitch pin hole and install and tighten down the anti-rattle bolt. With our bolt tight, our cargo carrier is secured to the vehicle and we're ready to load it up. At this point, we'll go ahead and give you a few measurements. The cargo carrier will add an additional 26 inches of overall length to the vehicle.
UWS Aluminum Cargo Carrier Review - 2008 Jeep Liberty
Today on our 2008 Jeep Liberty, we'll be test fitting the 23x51 Aluminum Cargo Carrier for 2-inch hitches from UWS. This is part number UWS03511. To begin our test fit, we'll simply slide the cargo carrier shank into the hitch, line up the hitch pin hole, and install the hitch pin. With our pin secured, our cargo is secured to the vehicle. We'll now go ahead and give you a few measurements. From the closest point of the cargo carrier's platform to the back of the vehicle is 6 inches and the cargo carrier will add an additional 29 inches of overall length to your vehicle.
Rola Hitch Cargo Carrier Review - 2008 Jeep Liberty
Today on our 2008 Jeep Liberty well be test fitting the Rola 23x56 Railed Cargo Carrier for 2-inch hitches part number 59502. Now to begin our test fit well simply slide the cargo carrier shank into the hitch, line up the hitch pin hole and install our hitch pin. With our hitch pin secured our cargo carrier is loaded to the vehicle and were ready to load our cargo. At this point well go ahead and give you a few measurements. Now from the closest point of the cargo carrier platform to the back of the vehicle is 12 inches and the cargo carrier will add an additional 36 inches of overall length to the vehicle. And that completes our test fit of the Rola 23x56 Railed Cargo Carrier for 2-inch hitches part number 59502..
Pro Series Hitch Cargo Carrier Review - 2008 Jeep Liberty
Today on our 2008 Jeep Liberty, we'll be test fitting the 24x60 Railed Cargo Carrier for 2-inch hitches from Pro Series, part number 63153. Now to begin our test fit, we'll simply slide the cargo carrier shank into the hitch, line up the hitch pin hole and install the hitch pin. That will secure our cargo carrier to the vehicle. Now, we'll go ahead and give you a few measurements. From the closest point of the cargo carrier's platform to the back of the vehicle is 12-1/2 inches and the cargo carrier will add an additional 38 inches of overall length to your vehicle. And that does it.
Curt Folding Hitch Cargo Carrier Review - 2008 Jeep Liberty
Today on our 2008 Jeep Liberty well be test fitting the Curt 24x60 Folding Cargo Carrier for 2-inch hitches part number C18132. Now to begin our test fit well simply slide the cargo carrier shank into the hitch, line up the hitch pin hole and install and secure our hitch pin. And with that our cargo carrier is secured to the vehicle. With the cargo carrier in the stored position well go ahead and give you a few measurements. From the closest point of the cargo carrier to the back of the vehicle is 3-1/2 inches and our ground clearance at the bottom of the cargo carrier is 16 inches. Well now go ahead and unfold the platform where well give you a few more measurements.
Curt Hitch Cargo Carrier Review - 2008 Jeep Liberty
Today on our 200 Jeep Liberty, well be test fitting the Curt 20x48 cargo carrier for both 1 -inch and 2-inch hitches part number C18145. With our included adapter already installed on the cargo carrier for the 2-inch hitch, well simply slide the cargo carrier shank into the hitch, line up the hitch pinhole and install and tighten down our anti-rattle bolt. With our bolt tight, our cargo carrier is secured to the vehicle. Well now go ahead and give you a few measurements. Now from the closest point of the cargo carrier platform to the back of the vehicle is 6 inches and the cargo carrier will add an addition 25 inches of overall length to the vehicle. The ground clearance of the cargo carrier is 17 and our exhaust on this vehicle exits the passenger side rear and is in line with the platform itself.
