Today on our 2007 Honda Odyssey, well be test fitting the Curt 20x60 folding aluminum cargo carrier part number C18100. Now all we need to do to fit the cargo carrier to the vehicle is simply install the cargo carrier shank into the hitch, line up the hitch pinhole and install our hitch pin. And with that, well give you a few measurements. Our ground clearance at the bottom of the cargo carrier is 8 inches and in the stored position the cargo sits very close to the vehicle but its not impacted in anyway. After pulling the pin to fold our cargo carrier down, the closest point of the cargo carrier is 6 inches from the bumper. And the cargo carrier will add an additional 26 inches of overall length to the Honda Odyssey.
The exhaust on the Honda Odyssey exits the passenger rear and is about 20 inches from the cargo carrier edge itself so there may be some heat transfer while driving down the road. And that completes our test fit of the Curt 20x60 folding cargo carrier part number C18100 on 2007 Honda Odyssey.
Rola Hitch Cargo Carrier Review - 2012 Honda Odyssey
Today on our 2012 Honda Odyssey well be test fitting the Rola 23x56 Cargo Carrier for 2-inch hitches part number 59502. Now to begin our test fit well slide the shank of the carrier into the opening of the hitch, line up our pinholes, insert our pin through our pinholes and secure with a clip. Now with the carrier secured to the vehicle, well go over a few clearance measurements to see how this carrier and the vehicle fit together. There is about 11 inches of ground clearance from the rear of the carrier. The closest part of the carrier to the closest part of the vehicle here at the rear bumper is about 5-1/2 inches. Weve added a total of 30 inches to the overall length of the vehicle.
Pro Series Hitch Cargo Carrier Review - 2012 Honda Odyssey
Today on our 2012 Honda Odyssey well be test fitting the Pro-Series 24x60 Railed Cargo Carrier for 2-inch hitches part number 63153. Now to begin our test fit well slide the shank of the carrier into the opening of the hitch, line up our pin hole, insert our pin through our pin holes and secure with the clip. Now that the carrier is secured to the vehicle well go over a few clearance measurements to see how this carrier and the vehicle fit together. There is about 11 inches of ground clearance from the rear of the carrier. The closest part of the carrier to the closest part of the vehicle here at the rear bumper is 6-1/2 inches. Weve added a total of 32 inches to the overall length of the vehicle.
Curt 20x60 Folding Aluminum Cargo Carrier Review - 2011 Honda Odyssey
Today on our 2011 Honda Odyssey well be test fitting part number C18100. This is the Curt 20 by 60 folding aluminum cargo carrier for two inch hitches. Now all well need to do to test fit this to the vehicle is slide in the cargo carrier shank, line up the hitch pin holes, and install the hitch pin. With the hitch pin in well go ahead and put the safety clip on the other side which will secure our cargo carrier to the vehicle. Now well go ahead and give you a few measurements. With the cargo carrier in the stored position it is of an inch from the closest point of the cargo carrier to the back of the vehicle.
Curt Hitch Cargo Carrier Review - 2011 Honda Odyssey
Today on our 2011 Honda Odyssey well be test fitting the Curt 20 by 48 cargo carrier for both inch and a quarter and two inch hitches, part number C18145. Now with our included adapter on our cargo carrier all well need to do is slide in the cargo carrier shank to the hitch, line up the hitch pin hole, and install and tighten down our anti-rattle bolt. With our bolt tight our cargo carrier is secured to the vehicle. Well now go ahead and give you a few measurements. Our cargo carriers closest point to the back of the vehicle is a of an inch. The cargo carrier will add an additional 19 inches of overall length to the vehicle.
Rola Hitch Cargo Carrier Review - 2011 Honda Odyssey
Today on our 2011 Honda Odyssey well be test fitting the Rola 23-inch x 56-inch Railed Cargo Carrier part number 59502. To mount our carrier to the vehicle well insert the shank of the carrier into the receiver tube of the hitch and line up our hitch pin holes. Well then secure the carrier using a standard 5/8-inch pin and clip. Now well go over a handful of clearance measurements. Weve got about 13 inches of ground clearance at the rear of the carrier and about 5 inches of clearance between the closest part of the carrier and the closest part of our bumper. Overall, weve added about 29 inches of length to the rear of the vehicle.
Pro Series Hitch Cargo Carrier Review - 2011 Honda Odyssey
Today on our 2011 Honda Odyssey well be test fitting the Pro Series 24-inch x 60-inch Railed Cargo Carrier part number 63153. To mount our carrier to the vehicle well insert the shank of the carrier into the receiver tube of the hitch. Well line up our hitch pin holes and secure the carrier with a standard 5/8-inch pin and clip. Now well go over a handful of clearance measurements. Weve got about 13 inches of ground clearance at the rear of the carrier. Weve got about 5-1/2 inches of clearance between the closest part of the carrier and the closest part of our bumper.
