Today on our 2007 Scion TC, we'll be test-fitting the Curt 20x48 Cargo Carrier, part number C18145. Now all we need to do to install the cargo carrier to the vehicle is slide the cargo carrier shank into the hitch, line up the hitch pin hole, and install and tighten down the anti-rattle bolt. Now our cargo carrier is secured to the vehicle and we're ready to load it up. At this point, we can give you a few measurements. Now the closest edge of the cargo carrier to the back of the vehicle is two inches, and the cargo carrier will add an additional 21 and a half inches of over-all length to the vehicle. Now the exhaust on the Scion TC, exits the passenger rear, and is approximately 6 inches from the cargo carrier platform.
So there will be some heat transfer while you're driving down the road. And that completes our test-fit of the Curt 20x48 Cargo Carrier, part number C18145, on our 2007 Scion TC.