Customers compare AMSC4 to these similar products
Products Featured in this Video
Today on our 2013 Honda Ridgeline, well be test fitting the Convert-A-Ball cushioned ball mount, part #AMSC4. Before we begin our test fit, well first need to get the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. Our measurement is 19 inches. To begin our test fit in the drop position, well go ahead and slide the shank of the ball mount into the opening of the hitch, line up our pinholes, slide our pin through our pinhole and secure with the clip. Well then measure from the ground to the top of the ball platform and get a measurement of 14 inches.
Youre going to want to measure your trailer ride height. This is the measurement from the ground to the bottom of the coupler. If your measurement matches ours, this should be an appropriate ball mount for you. Now, well go ahead and flip the ball mount over into the rise position, and again, measure from the ground to the top of the ball platform. Our measurement is 22 inches.
Again, if your trailer ride height matches ours, this should be an appropriate ball mount for you. That concludes todays test fit for the Convert-A-Ball Cushioned Ball Mount, part #AMSC4, on our 2013 Honda Ridgeline.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.