Today were working with a 2012 Toyota Highlander and were going to be test fitting the Convert-A-Ball cushioned ball mount, part number AMSC4. Now, this ball mount provides a 2-3/4 inch rise or a 4 inch drop. First, well measure the hitch height of our Highlander, thats from the ground to the inside top edge of our receiver tube. Our example measures 14-3/4 inches tall. Now, keep in mind this measurement will vary depending on the different models, tire sizes, or hitches available for these vehicles. With a 14-3/4 inch hitch height, we probably wont want to use this ball mount in the drop position as it would set us down about 10 inches from the ground.
But we will go ahead and take a look at it in the rise position as this would put it in the ball park for a standard trailer height. From the ground to the top of our ball platform measures 17-1/2 inches. So, if youre trailer measures 17-1.2 inches from the ground to the bottom edge of the coupler this would be a great application. And thats it for our test fit of the Convert-A-Ball cushioned bal mount, part number AMSC4 on our 2012 Toyota Highlander.
Today were working with the 2012 Toyota Highlander and were going to be test fitting the Draw-Tite ball mount, part number 2923. First, we want to take a hitch height measurement. Thats from the ground to the inside top edge of the receiver tube. On this particular vehicle its 14-3/4 inches. Keep in mind this measurement may vary depending on the model of the vehicle, hitch height, or tire size so make sure to measure your particular vehicle when shopping for a ball mount. First, well mount this ball mount in the drop position.
Today on our 2012 Toyota Highlander were gonna take a quick look at the Convert-A-Ball cushioned ball mount part number AMSC2. First thing were going to do is take a measurement from the ground to the inside top edge of our receiver tube. This measurement is known as the hitch height. The measurement may vary a bit depending on tires or after market modifications to the vehicle so make sure to measure your own vehicle. Our hitch measures 14-3/4 inches high. Well first take our ball mount and mount it in the drop position using a pin and clip.