Today on our 2003 Dodge Ram 2500 well be installing the CIPA Custom Towing Mirror for the drivers side part number 10701. This will work in conjunction with the passenger side part number 10702. Now all well need to do to install our custom mirror is simply slide it over the factory OEM mirror and then using the wedge well lock it into place. Once the wedge is in place, well simply use the knob on the back of the mirror to tighten it down and secure our wedge and that will do it for our CIPA Mirror on our 2003 Dodge Ram 2500.
Today on our 2009 Dodge RAM pickup, we're doing a test fit of the Longview Custom Towing Mirrors slip-on style for the driver and the passenger side, part number LVT-3100C. Now, the Longview Custom Towing Mirrors do come in a right and left side. The mirror that's part of the towing mirror is fully adjustable, but you must do it manually. You can see here inside, there's a foam pad as well as a couple of felt areas that keep your factory mirror from being scratched. It is also made of a durable ABS plastic housing. As you can see here on the bottom, there's kind of a cutout area which allows you to still see the puddle light on the factory mirror. To install the mirror, you simply slide it over the factory mirror, then you use the hook and hook it to the edge of the factory mirror, and we found when putting the mirror on, it's best if you hold your hand on the hook and bend in just slightly on the towing mirror.
Today on our 2011 Dodge Ram pickup well be test-fitting the CIPA custom towing mirror slip-on for the drivers side, part number CM11401. To begin our test fit, well take our custom towing mirror, slip it over our drivers side mirror and then move to the back side. Well insert the wedge between the towing mirror and the mirror head, align the threaded hole with the molded cup on the back of the wedge, and then screw the knob through the raised hole in the back of the towing mirror, and then well want to tighten it all the way down. And just like that our custom towing mirror is installed and were ready to go. The passenger side towing mirror is available with part number CM11402. That completes todays test fit for the CIPA custom towing mirror for the drivers side, part number CM11401 on our 2011 Dodge Ram pickup..
Today on our 2009 Dodge Ram Pick-Up we're going to do a test fit of part number ks80710 from K-Source. One part number covers both left and right side. To start off we're going to make sure that our mirrors are completely cleaned off. Then we can go ahead and install the new K-Source mirror.We'll take the top edge of the mirror, make sure the clips grab the top edge of the factory mirror on the truck and we'll slowly bring the K-Source mirror around the factory mirror. Then we'll make sure it latches underneath and that's really all it takes to snap on the mirror. A few more things to know about this mirror is it also has a cutout for the turn lights at the bottom of the mirror.The K-Source mirror can be moved independently of the factory mirror.
Today, on this 2006 Dodge Ram Pick-up, we're going to do a test fit of the K-Source Custom Towing Mirrors, Part Number KS80700.First thing we're going to do on our test fit is go ahead and make sure the factory mirror's clean. We'll go ahead and clean off first, so when we install the K-Source mirror it doesn't take the dirt and debris and run it into the plastic.Now, we'll start off on the passenger side, we'll go ahead and catch the top-edge of the factory mirror first then slowly bring the mirror around towards the bottom, where we can push the bottom part of the K-Source mirror into place where it snaps on to the outside edge of the factory mirror. That's all it takes to install it and holds it in place.Now, the factory mirror can move independent of the K-Source mirror as well. We'll go ahead and move the K-Source mirror to see that it has four range of movement.We're done on the passenger side, let's go ahead and repeat the same process over on to the driver's side. With just a little bit of time, our K-Source mirrors were installed. With that, that'll finish it for Part Number KS80700 from K-Source, the Custom Towing Mirrors on our 2006 Dodge Ram Pick-up..
Today, on our 2009 Dodge Ram 1500, well be test fitting the CIPA Custom Towing Mirror for the driver side, Part Number CM11401. Now, these slip-on towing mirrors give you an extra advantage when towing large boats or trailers giving you an expanded field of vision to help you when maneuvering these items down the road.Now, before we begin our test fit, well first need to put the soft foam padding on to the black bracket of our mirror. But for todays demonstration, we wont be installing the foam pad.Were now ready to begin our test fit. Well take our CIPA Custom Towing Mirror and slip it on to our Dodge Rams manufacturing mirror. You can notice the grooves. On the underside of the CIPA mirror, well slide directly on to the top and bottom of our Dodge Ram manufacturers mirror.Once the mirror is slid all the way on, well then move to the back of the mirror where well slide on our black clip.
Today on our 2006 Dodge Ram pickup, well be test fitting the Longview Custom Towing Mirrors, part number CTM3100B. This will be a pair, one for the driver and passenger side.First we'll go ahead and install our mirrors. To install the mirror, we'll take the drivers side mirror and slide it onto and over the manufacturers mirror, lining up the inner edge of the mirror with the groove in the manufacturers mirror.Once into position, we'll take the hold down hook, feed it from the front side of the mirror towards the back going through the rear hole cut out in our custom towing mirror and then securing it with the hand knob.Now with our mirror installed, its fully customizable and can be adjusted as necessary to fit your vehicle and trailer.Now we'll go ahead and repeat the process on the passenger side.With both sides installed, thatll complete the test fit of the Longview Custom Towing Mirrors, part number CTM3100B on our 2006 Dodge Ram pickup.