Today is 2006 Dodge 3500, were going to install brake controller from Tekonsha to P3 part number 90195 and a brake controller adapter part number 3020-P from Tekonsha. All right, first thing well do is go ahead and take our adapter cord and plug it into port just underneath the dash. This end of the adapter cord Im going to plug it into the port underneath the dash. Plug and well just go ahead and plug until it snaps and were good to go. Leave that alone for now, then well find a spot to mount our brake controller. This truck has a brake controller previously, so well actually one of its existing holes thats already in the dash and through that room were going to work here.
Make sure our brackets level and will install screw on the other side into the new plastic. Plug our wire harness to the brake controller and then were going to mount the brake controller through the bracket. Now all we got to do is take our cord and zip tight it up and out of way. And with those few steps, were already finished. And there you have it for the P3 brake controller, part number 90195 and the adapter cord part number 3020-P on a 2006 Dodge 3500..
Trailer Brake Controller Installation - 2001 Dodge Ram
Today is 2001 Dodge 1500 Ram Pickup. Were going to install Brake Control, part number 90885, Prodigy P2 Brake Controller. And also well be using part number ETBC7 for installation kit. Now, first thing were going to do is go ahead and attach our bracket to the hitch for our wire harness. Next weve part number 118140. Theres not much to work with the hitch here, so were going to put it on the end at this point.
Brake Controller Installation - 2005 Dodge Ram 3500
Alright today on this 2003 doge ram 3500 pick up, were going to install parts for brake controller part number 90885. Were also going to install the adaptor core part number 3020-p. First off well go ahead and show you where the port is at on the vehicle, the tilt port is right behind this wire harness, its the blue socket right here. Were going to take our adapt cord and draw out the back, just plug right into it.Now the wire harness around it makes it for a tight fit, so you may have to pop the port loose to get a better angle at it to install it. Make sure it snaps into place and we got a cord. Now we go and find a spot to mount our bracket for our brake controller.
Trailer Brake Controller Installation - 2008 Dodge Ram
Today on this 2008 Dodge Ram 3500 were gonna install the Tekonsha P3 Brake Controller with direct wiring harness part number 90195-3020P.Our first step is gonna be locating the manufacturers connector for the brake control. The blue connector just above the power control module is the one we need.Well take our direct wire harness and plug directly into the blue connector.Now were plugged into the manufacturers connection, Im gonna go ahead and set my harness aside and we need to mount our brake controller.Well take our mounting bracket that comes with our install kit and simply mount it here underneath the dash. Behind the plastic cover of the dash is a metal bracket and today Im gonna be using self-threading screws to install my bracket. You could drill a small power hole and use the screws that come in the install kit.Now we can go ahead and install the brake controller on our mount.Now with our brake controller mounted, well take the other end of our wiring harness and plug it right into the back of the brake controller.As you can see, the power lit up our brake controller. Now we just need to do some final touch up.Im gonna take a couple of zip ties and secure my wiring up underneath the dash. Simply take the extra from our wiring harness zip tie it off to the manufacturers wiring.
Trailer Brake Controller Installation - 2002 Dodge Ram 3500
Today on this 2002 Dodge Full Size Pickup 3500 were going to install a brake controller part number 90885, the Prodigy P2 Brake Controller, and the adapter cord part number 320-P. First well start off with the adapter cord, alright this is our port right here, now it is kind of covered up by the wire, sometimes you can sneak it through or sometimes you could just pop it off and get a little easier access with it. It plugs together, were going to go ahead and snap this back into place, now well take our cord, and well just leave it alone for now. Lets go ahead and mount up the brake controller. Now well go ahead and mount our brake controller bracket in this are right here where it is still easy to reach, but not in the way either. Well just line up with this line right here; well use the hardware to attach it to the dashboard.
Trailer Brake Controller Installation - 2008 Dodge Ram 3500
Today on this 2008 Dodge 3500 we are going to install the Tekonsha P3 brake controller, part number 90195. Our first step is going to be locating where you want to mount your brake controller. For this application, we are going to mount it right here. One of my mounting fasteners is also going to be one of the current trim fasteners. So I will go ahead and remove that first and install my mounting bracket. For my other fastener, we are just going to use one of the screws provided in the installation kit. 0:35
