Today on our 2007 Toyota 4 Runner we will be installing the AFE Power air filter AFE31-10027.The AFE POWER air filter uses a new pro-dry S oil free dryer filter. It has a revolutionary 2 layers synthetic that requires no oil to filter out dirt. Now, this air filter is very simple to install. We'll simply undo the 4 tension clips; 2 on the front and 2 on the back. Then simply lift the top part of the box up and slide the filter out. Then take the new air filter while lifting the front top of the box up then slide the new filter in to place making sure that it is sided in the box then put the lid back on then restore the 4 tension clips.
After the new air filter is installed you will need to install the do not discard sticker that came with the package. This will help anybody servicing your vehicle to know that you have an AFE POWER air filter in your vehicle that does not need to be changed.First we wipe out the top of the air box to remove any oil or debris and simply adhere the sticker to the top of the box. There are 3 methods of cleaning your pro-dryer air filter described for you within the instructions contained in the package. To get the air filter 85% clean you can simply remove it from the air filter housing and tap it clean. If youd like to get it 96% clean, after removing it from the air filter box you can simply vacuum it out with a standard dry- vac.
To get it 100% clean simply remove the filter and run the filter under the running water from the inside out. Turn the filter to remove all visible and hidden dirt. It may sometimes be necessary to use a mild soap to get it fully cleaned. Then you simply let it dry and reinstall it in the vehicle. And that does it for part number AFE31-10027, the AFE POWER air filter on a 2007 Toyota 4 Runner..