customer service | view cart 
Trailer Hitch Installation - 2009 Hyundai Santa Fe
Custom Fit Trailer Hitch
This Product Fits The Following Vehicles
2007 - 2009 Hyundai Santa Fe
Products Featured in this Video
Manufacturer Instructions
Installation of a Trailer Hitch on a 2009 Hyundai Santa Fe
Today on this 2009 Hyundai Santa Fe we are going to install part number 75471 from Draw-Tite. And this will also apply to part number 87414 from Hidden Hitch. I will go ahead and show you where the hitch mounts up on the vehicle. This is actually relatively easy although you do want to have an extra set of hands when you put it up there. It is going to install in these two holes at the end of the frame right here. This is a new vehicle so the threads are relatively clean however if you have an older vehicle what you want to do is go ahead and clean out those threads just to make sure. This is going to be identical on both sides of the vehicle. We do not even have to take down the exhaust either. All right we have got the threads cleaned out. We can go ahead and put the hitch up into position. Again it is a good idea to have and extra set of hands to hold it up. 00:37
All right we have got our bolts started, you have got a little bit of movement left and right. Move it to the center as best as possible. And then go ahead and just snug up the bolts. Now we have got our bolts snugged down you can go ahead and torque the bolts down as specified in the instructions. Okay with those two steps our hitch is already installed and there you have it for part number 75471 from Draw-Tite. 01:12
All right with the threads cleaned out, we can go ahead and put the hitch up into position. Again, it is a good idea to have an extra set of hands to hold it up. Alright we have got our bolt started. You have got a little bit of movement left and right move to center as best as possible and the just go ahead and snug up the bolts. :47
Now that we have our bolts snugged down, we can go ahead and torque the bolts down as specified in the instructions. And with those few steps our hitch is already installed and there you have it for part number 75471 from Draw-tite.
Filter Videos
- Search By Other Makes
- Acura (4)
- Audi (1)
- BMW (2)
- Buick (5)
- Cadillac (1)
- Chevrolet (36)
- Chrysler (16)
- Dodge (29)
- Ford (44)
- GEO (1)
- GMC (8)
- Honda (24)
- Hyundai (11)
- Infiniti (1)
- Isuzu (1)
- Jeep (18)
- Kia (9)
- Lincoln (2)
- Mazda (11)
- Mercury (2)
- Mitsubishi (4)
- Nissan (12)
- Oldsmobile (2)
- Pontiac (9)
- Saab (1)
- Saturn (4)
- Scion (2)
- Subaru (6)
- Suzuki (1)
- Toyota (27)
- Volkswagen (5)
- Volvo (1)
- Trailer Hitch Help
Specialty Trailer Hitch Review- Trailer Hitch Receiver Sizes
- Trailer Hitch Types Review
- Trailer Hitch Installation Tips
- What Do I Need To Tow A Trailer?
- Trailer Hitch Classes Review
Trailer Hitch Classes and Weight Capacity Comparison- Class I Trailer Hitch and Weight Capacities Review
- Class II Trailer Hitch and Weight Capacities Review
- Class III Trailer Hitch and Weight Capacities Review
- Using Stove Wire as a Bolt Leader Demonstration
- Lowering Exhaust Pipe on Vehicle with Rubber Hanger
- Lowering Exhaust Example for Trailer Hitch Installation
- Using Fish Wire for Trailer Hitch Installation
- Drilling a Spare Tire Pan for a Trailer Hitch Installation
- Drilling to Enlarge a Frame Hole for Hitch Install
- Handle Nut Demonstration
- Cleaning Weld Nuts for Trailer Hitch Installation
Search
Contact and Help
What our customers said:
very easy to shop
Mike
Richmond, CA
