Today we are going to install part number 36320 from Draw-Tite, and we are going to install this Class II receiver hitch on our 2007 Dodge Grand Caravan with the Stow n Go seating. Next we will show you where the hitch installs in the vehicle. Using these two bolts right here, we are going to take these out. The middle one stays in its place. We will reuse these bolts. And behind the spring shackle, it is going to use this bolt here, too. Again, we are going to reuse that bolt on the install. And it is going to be identical on both sides. And this line has a little bit of flexibility so you can actually move it around to get your hitch installed when we get around to that.
All right at this point we can go ahead and install the hitch, and you have to work around the springs, so it is definitely going to take an extra set of hands to do this. At this point, once you get your bolts started, go ahead and snug your bolts down. Once you get your bolts snugged down, make sure that the hitch wraps around this center bolt here and is not sitting on the washer. Once you have that set, you can give your bolts their final torque, as specified in the instructions. All right, with our bolts tightened down, that covers it for our install of part number 36320 from Draw-Tite on our 2007 Dodge Caravan with the Stow n Go seating.
Do you have a question about this product?
With thousands of product installations and troubleshoots, we don't just sell this stuff, we know how to install and use it.
Please include the year, make, and model of your vehicle, being as specific as possible, if you have a question about a custom fit product.
Subject:
Name:
Contact email:
How can our experts help?
