Edge Evolution Performance Module - 2002 Ford Powerstroke

Please select the year of your vehicle to search for your vehicle performance chip kit.

Search For Year

Installation of an Evolution Performance Module on 2002 Ford Powerstroke

This is the installation of the Edge Evolution power module for the Ford Powerstroke 7.3 liter. This will fit the 1999 through 2003, this one is being installed on the 2002 model. The first step in installing this is to put a temperature probe into the exhaust manifold. We have to drill out the hole, tap it, install the threads, and then install the probe. Now we will go ahead and install the cable onto the port now that the hole we drilled is tapped out. We run this up through the firewall and back inside so we can make our connections inside the vehicle. After running the cable up through the vehicle we will route it through the firewall. The next step is to remove the fuse panel cover, to locate the OBDII port. Next we plug the OBDII cable into the OBDII port and route the cable into place. Now we route the other end of the cable out through the door sill, take the weather stripping and pull that back to expose the port and route it up through here. To secure the pod, locate the metal brackets and the pod, note that the brackets are numbered and should be placed in the appropriate, numbered locations inside the pod. Use the permanent, double sided tape to secure the brackets inside the pod. Make sure that the numbers match up. The next step is to clean the pod mounting location. Once you have secured the velco and double checked the location, you can secure the pod with the velcro. When the mounting bracket is secured in place just plug the cable into the back of the monitor and plug the cable coming through the firewall into the port.