This ultimate grease gun is equipped with a 10 inch grease pipe, a heavy duty coupler and a longer lever than you see with other competitors models. The barrel and the loading lever both come standard with comfort grips and the stroke on the lever is variable. In other words, if you need a lot of grease just increase the stroke. This also has a nice air bleeder valve installed on it so when you put a new cartridge in it, or if you somehow get a air bubble inside it you can let out that air. This unit puts out about 10,000 psi total pressure and this unit is a heavy duty design to take the abuse of being dropped into the toolbox and whatnot. This is really an over sized unit intended for industrial applications, no shop should be without one of these. As you can see here, the barrel itself is about 10 inches and the are grips on the barrel here and on the handle too. You can see with the lever here that we talked about earlier, you do not have to go all the way out, you can deliver just a little bit at a time or go all the way out to put out the maximum grease that you can.
This is the bleeder valve we talked about earlier. You press that to get any trapped air out of there when you put in a new cartridge. While we are talking about the cartridge, we will show you how to load one up. Drop your cartridge inside here, then reassemble it and you are ready to go. Also you can release the pin. This is where it shines, with this grip because sometimes you get this all greasy and you can get a good hold of it that way. There you have it, that is part # L30480, from Plews, the LubriMatic ultimate grease gun.