This easily installed universal towing mirror will mount to any mirror with its conforming rubber knobs and securing clamps this mirror will attach easily to any mirror you have on your vehicle. The total length of the mirror is 18 inches and the mirror itself is 5x5-3/4 inches. Before we can install this mirror there is a little bit of prep we have to do. First make sure the mirror itself on your vehicle is nice and clean, you do not want to trap any dust or dirt between the pads and the mirror and ruin the finish on your vehicle. First of what we need to do is install these pads, and they are just self adhesive. While we are on the subject with these knobs, we will show you how adjustable they are. The knobs actually spin up and down so you can raise the height of them. This knob here will actually spin back down to lock it into place. That way it will help conform to the curvature of your mirror.
Also these are clamps right here that actually will clamp onto the mirror itself. The edge will go here and push this flap down and it will secure it into place. Let us go ahead and install this on our vehicle. We will need to do a couple of test fits by pushing it against your original mirror and just see if you need to adjust these feet or not. It looks like we are just going to leave it all the way down and go from there and see how it works. We need to loosen our straps up next and I will show you how to do that. To loosen these straps up, we have to pull the knob straight out, then you can pull them out and get your slack. At this point we can go ahead and take these clips and install them on the mirror. Push down a little bit and pull them in. We will do the same thing on the bottom. Once you have them clipped in, make sure you center it the way you want it, then push that back knob back in. Now we can go ahead and tighten that knob up. You might want to wiggle it every now and then just to make sure you take up some slack too.
Give it a few tugs to make sure, re-inspect your feet and, it looks like here, this one actually pulled away. So we need to undo it and redo the feet because you want to have all of these connecting to the mirror. Spin that out and there you have it and it is really not going to go anywhere. Also you notice there are a couple of extra hooks and an extra pad that came with it. These are in case you mess one up or lose it and the hooks are for different style mirrors, some mirrors have casings that are thicker than some others, so that way it helps out for different vehicles, makes it more universal. Another nice note about this is it actually has an air vent on the side which helps cut down on wind resistance and probably less wind vibration too. There you have it for part # 40375 from Cipa, the universal strap on towing mirror.