
customer service | view cart

Today well show you the installation and typical use of this product. Its a pretty easy deal, it does require one other component, you have to supply the ball mount for it because it does not come with that. Hopefully you can use your existing ballmount and well show you how it works. Well start off with ing our ballmount into the two step and then its a simple matter of tightening the bolts down. First well prepare our bolts, just take your bolt here run a nut on there which will be the jam nut. Now well our lock washer on there and well do the same for the other one. These bolts will get stuck in the other side of the two step here and push against the ballmount to hold it in place. Now take a wrench and snug them up, after that take the jam nuts and well cinch those tight to keep the bolts from coming out.
We have our two step and ballmount assembled and now the next step is to install it on our hitch. As you can see here we have it installed, is does stick out because in this case the hitch does sit a little further back so the two step is not hidden by the bumper. To use it we just pull the pin and pull the two step out and put the safety pin back in. Now you can step in and out of it as you need. You have a nice piece of equipment here with painted steel and aluminum tread plate that will last a very long time throughout the years and weather. There you have it for part # CR-601 the cowboy two step from Bully truck accessories.