Today we are going to install part number 32-2210 from Westin. It is the Bull bar assembly we will be installing on a 2008 Toyota FJ Cruiser. To start our install we will have to install some brackets onto the frame itself and they are tucked up pretty far up in here on the brace that holds the bumper up. There are 2 existing holes so what you need to do is drop 2 bolts into the bumper bracket from the top all the way down through the bottom and it comes with these long bolts to do it with. Now to install one of 2 brackets. There is going to be one here and one is going to have an out rigger from here going out to this bracket to the assembly right here. We do not want to tighten them up yet, we just want to leave them snug so that we have some working room. Next this bracket has to get installed behind it. Then it gets bolted to this assembly here. And then this bracket gets bolted to a threaded hole that is already inside the assembly here.
At this point we can mount up the bull bar to our bracketry and the bar mounts to the inside of the black bracket. Once you have the bull bar mounted up loosely go ahead and go ahead and figure out how close you want the brush guard to the grill and then tighten down the bolts after that. Once you have your 2 bracket bolts here tightened down, then you can go ahead and tighten up the brackets that go to the bumper bracket and the sub assembly here. There you have it for part number 32-2210 from Westin.