Today we are going to show you part number 830850. This the 20 by 60 folding cargo carrier for 2 inch trailer hitches from SportRack. The features of this are that it is powder coated to resist corrosion, it is 20 by 60 expanded steel mesh floor and the shank is angled up for better ground clearance. The side rails help keep cargo in place to provide tie down points and the carrier folds up when not in use. It fits 2 by 2 trailer hitch receivers. It has a weight capacity of 500 pounds. From outside the rail to outside the rail is 21 and 1/4 by 61 and 1/4. The side rails measure 6 inches high and it is a 3 piece bolt together unit. Also the cargo carrier shank has a built in anti rattle device used to reduce the vibration and noise of the carrier inside the trailer hitch. This is ideal for transporting anything from sports equipment to lawn gear. Anything you can think of to put in here that you do not want inside of your vehicle.
We are going to show you how it folds up in a moment here. You simply pull out the pin and lift up and reinsert the pin to the top pole. We will show you that in a moment. As you can see here this is the anti rattle pin. You simply screw it in just like a regular bolt. Tighten it down using either a 3-1/4 inch wrench or ratchet that really tighten it down. It also has a lock washer and regular washer that comes with it. We are going to go ahead and show you the full folding feature, which is the main feature of this cargo carrier. It is pretty simple. First you pull the clip and then you go for the pin. Now you simply lift up until it reaches the position to repin it in this hole. Then you reclip it. There you have it for part number A30850 the 20 by 60 folding cargo carrier for 2 inch trailer hitches from SportRack.
