All right, today we are going to review part number 7070 from Cipa, the Clip-on Towing Mirror. This mirror can adjust to a variety of different factory mirrors, and the arms themselves can move in different directions. And the mirror itself will also rotate, too. Now we can go ahead and install this on a typical vehicle and show you how it works.
All right, to install this mirror, simply manipulate the arms to make sure it matches the edge of your mirror. See, these little edges will catch on the bottom edge of this mirror right here. And just kind of push it down into place and then maybe pull it toward the end a little bit, as much as you can.. And then you go ahead and pull your straps around the bottom of the mirror, and pull on your strap a little bit to take up as much slack as you can. Take one strap off and then tighten it just a little bit more, and then you can secure it by putting it back through the other side of the buckle. Then reattach and do the same thing for the other strap. When you have it properly secured, it should not move at all. All right, and that covers our review of part number 7070 from Cipa, the Clip-on Towing Mirror.