Today we are going to show you part number A60070 from Agricover. This is their Access Storage Pocket. All right, what we have here are storage pockets that mount to the inside of the fender wells and go back to the back pillar by the tailgate. The material that they are made out of is galvanized steel. We will show you a couple of benefits of having this device in your truck. What is also nice about this product is it also works with the Easy Retriever from the same company. And it has two notches built into the pockets to help store it when you are not using it. And we are going to show you how it works. And there are two sections - one here, and one here. And you can also use this to keep light-duty cargo from sliding around a little bit, too.
And we have got some equipment that we will just go ahead and throw in there. It could be virtually anything. We are going to use some towing equipment, like a ball mount and a bag here. We will set that down there. If you have a work truck, you can keep some of your chemicals in there, too, also. We will show you how this gets installed. It is pretty easy stuff.
Basically, the unit comes as one piece. You set it in the bed the way you want it, and mark out your holes. It also comes with these self-drilling bits that basically just go into the side of the pillar here and just installs and tightens down in just one nice, neat step. There is one here, and there is also one in the back, here, going toward the fender well. And there are three options to drill. You can use any of these attachment holes to make the best fit possible. And there you have it for part number A60070, the Access Storage Pocket.