This is a Light Kit for cargo carriers 63153 and 63155. We will show you how this light kit gets installed on a cargo carrier which is part # 63153. To begin with we will install the grommets, they just snap into place. They will be a little bit loose, but when you install the light it will spread out a little further. Now we simply install our lights, again they pop into place. When you have them in make sure the grommet is snapped in on both sides. Again for the other side. What we need to do next is start our wire harness, you have a yellow and brown wire, which goes to the left hand side. The green and brown wire goes to the right side. You want to make sure before you begin you have the right wire going to the correct side. This is the left side of the vehicle so we will go ahead and start our wiring.
The wiring plugs in right here and it has to be perfectly straight or else it will be hard to press. Just take your time and it will slide right in. Once you have your first connection, take your harness and run it around the outside edge because its going to get zip tied all the way up front. We will take the green wire and run it over to the passenger side too. At this point we can zip tie the wire going over to the left hand side. At this point we have some excess wire so we will take that and zip tie it to this bracket here. Once you have all your zip ties done, snip off the ends and essentially your install will be complete. There you have it for part # 20174, the light kit for cargo carrier part #s 63153 and 63155
