
customer service | view cart

Custom Fit Vehicle Wiring
This Product Fits The Following Vehicles
1987 - 1991 Ford F-100, F-150, F-250, F-350
1992 - 1996 Ford F-150
1992 - 1996 Ford F-250 and F-350
1997 - 1998 Ford F-250 and F-350 Heavy Duty
1993 - 1995 Ford Lightning Pickup
1987 - 1991 Ford F-100, F-150, F-250, F-350 Except Deep Drop Bumper
1992 - 1996 Ford F-150 Except Deep Drop Bumper
1992 - 1996 Ford F-250 and F-350 Except Deep Drop Bumper
1987 - 1991 Ford F-100, F-150, F-250, F-350 with Deep Drop Bumper
1992 - 1996 Ford F-150 with Deep Drop Bumper
1992 - 1996 Ford F-250 and F-350 with Deep Drop Bumper
1997 - 1997 Ford F-250 and F-350 Heavy Duty with Deep Drop Bumper
Today we are going to install part number 118316 from Tow Ready, and this is a T-1 connector we are going to install on a 1994 Ford pickup. This is the point in the harness that we need to split apart and attach our T connector. It is right behind the bumper on the drivers side. There is a little button you push down. It is kind of hard to see on the end. You push it down and it comes apart. And you just reinstall the T connector in the middle of it and then make sure you clip it back together. And it might be a good idea to go ahead and use a zip tie to tie it off somewhere, and that is pretty much all there is to it. Just route your 4-pole wire where you want it along the frame and out by the hitch. Just zip tie it to secure it to the frame and keep it from bouncing around. Then we can route our wire out to the hitch. We will just put it by the chain loop here.
And when you are done with the hitch, make sure you tighten up the spare tire bracket if you had to loosen it to give you some room. All right, and there you have it for our install of part number 118316 from Tow Ready on our 1994 Ford F-150 pickup.
Questions About Wiring Harness Installation - 1994 Ford F150
7 Hole Wiring Repair for 1991 F250 diesel truck
Questions About Part 118316
Wiring a 1990 Ford F-150
Brake Controller Wiring on a 1993 Ford F-150