Today we are going to show you the rage dirt bike carrier part number AMC6002. It is a two bike dirt bike carrier designed for a two inch receiver. It comes with an anti-rattle device which is located back here and you simply tighten down these screws to lock it down into place. It is made of aluminum and steel construction, it comes with hangars here to strap down the dirt bike, so you have two here and two back here. The dirt bike carrier also comes with these pins which we will slide in here for bikes with smaller tires. If you have a larger bike, simply take the pin out and your tire will rest in the larger crevice there which will help with stability while you are towing. 1:17
It also comes with this ramp that you see here, which detaches and you set it on the rear of the dirt bike carrier for loading and off-loading of the bikes, the max weight for this carrier is 600 pounds. Now we will go ahead and load a bike onto the carrier. We will start by taking this ramp off here, you have two little wing nuts and the ramps slides off the front. Now I am going to attach the ramp back here in the back, there is a little lip right here so this will rest right on that lip. I am going to load the bike now. 2:04
Now that we have the bike loaded here, I am going to grab a ratchet strap and attach it to the attachment point down here, then I will find some point to attach to up here at the motorcycle. Now that I have this side we will move to the other side and do the same thing. Now that your bikes are securely in place we will take the ramp off here and place it back onto the front and we will put our wing nuts back into place. And this will conclude our demo of part number AMC6002 the two dirt bike carrier from Rage. 3:50
