Today we are going to show you part number 71003-M. This is from Classic Accessories. The first step involved is removing the antenna. Some cars have build in antennas, but in this case this Saturns removes so what we will do is simply unscrew it and leave it in the vehicle. This cover comes with the bag, it is actually attached to the bag itself so you do not have to worry about losing it. So we will go ahead and unpack the bag and the cover. And it also comes with a cable and lock to secure the cover to the car. Put that to the side for now. :31
Lets go ahead and take the bag off the cover. And no, this is not a factory pack job, this will look like yours after you unpack it the first time. You can see how the bag is attached so you can not loose it at all. We will get it out of the bag here, it has a tag to show you where the front is so you do not get too lost in the fabric. Lets go ahead and pull it over. :52
The stitching on the side here kind of gives you an idea where the actual sides are on the cover to match up on the corner of the car. Next, go ahead and install the security cable. Goes through this loop right here, and put it through the opposite loop of the cable. Take the other end, and push it to the other side of the car. Pull it through the loop, make your own little loop, and reinstall the supplied lock. You cover is now secure. And again, getting back to the antenna, what you can do if you have an antenna, you can feel for the base of it and just use a small knife to make a small slit in the cover. Then you can reinstall your antenna and a slit when you put the cover back on every time.