Today we are going to install and review the Cipa Deluxe door mount mirror, part number 11650. The Cipa Deluxe door mount mirror is a universal mount that will fit both the driver and passenger sides of the vehicle. The mirror is easily installed and removed and the rubber coated tips help protect your vehicle paint. The face of the mirror measures 5 inches by 8 inches and it will extend out a total of 17 inches. The top bracket will fit inside the window opening of your door with these two tabs. The hook on the end of the strap will go all of the way down to the bottom of the door and hook underneath it. There is a ratcheting strap system that you will use to tighten up that lower strap. The mirror arm is adjustable with these two set screws on the top. Once they are loosened, you can slide the arm out of the upper bracket and extend it however far you need it. Once you set the extension, go ahead and tighten down the set screws to lock the mirror in place. The arm for the lower hook is also adjustable depending on the size of your door. Again loosen the set screw. The arm will slide to accommodate a wide variety of door heights. There is also a pad on the buckle mount to protect the door. 1:11
Now we are ready to install the mirror. Make sure that the window is rolled all of the way down and open your door. Take the hook strap and place it on the underside of your door. Make sure that the tabs on the top of the frame are in between the doors outer seal and the glass. You want to make sure that your top bracket is about as level as possible and that the foot rests against the widest portion of the door. It is a little high so we are going to loosen our bolt and extend the arm just a little. Once we are level and we have our foot pad in the right spot, we can go ahead and tighten down the strap with the ratcheting system on the top of the mount. Once you have tightened the strap down, give it a couple of minutes as the nylon will stretch. After a few minutes, tighten it up again to make sure that it has not stretched too far. If the top bracket is pulled to the outside seal, we should be able to roll up our window without it interfering. Now that we have out mirror assembly adjusted and set to the vehicle, we can go ahead and start adjusting how the mirror looks. And there you have it for the Cipa Deluxe door mount mirror, part number 11650.
