customer service | view cart 
Trailer Hitch Installation - 2007 Toyota Tundra
Custom Fit Trailer Hitch
This Product Fits The Following Vehicles
2007 - 2010 Toyota Tundra
Products Featured in this Video
Manufacturer InstructionsInstallation of a Trailer Hitch on a 2007 Toyota Tundra
Today we are going to install part number 75527 from Draw-Tite, and we are going to install this 2-inch receiver hitch on a 2007 Toyota Tundra. Okay, the hitch is going to mount up in this spot right here, where you see this L-shape bracket. There are four bolts going through here. All these bolts come out, and then the bracket comes off. And then also the hitch will install on the bumper bracket below, in the holes down here. And it is going to be identical on the passengers side and the drivers side. Okay, we have got that bracket off go ahead and do the same thing to the other side.
At this point, we can go ahead and put the hitch in position. We will use a bolt on each side to hold the hitch up inside the weld nuts, and then we will install the rest of the hardware. It is kind of awkward, it is kind of a wide hitch. It is a good idea to have an extra set of hands in there to help lift it up. Theres one bolt in each side so were ready to install the rest of our hardware. Next we will install the hardware for this slot right here, and it is going to use a plate and a 1/2-inch by 1-3/4 inch bolt, and it is going to go from the outside in, like that. We will also go ahead and put the conical-tooth washer and nut on. Install our hardware on the top here from the outside in, install the bolt, and then the flat washer, lock washer, and then the nut. All right, we will go ahead and finish the hardware on the drivers side now. The reason you leave everything loose is so you can move the hitch around as you need it to get the hardware in place. Okay, and at this point now you can start snugging down all the hardware. Go ahead and torque down the bolts as specified in the instructions. All right, with that, that finishes our install of part number 75527 from Draw-Tite.
Filter Videos
- Search By Other Makes
- Acura (4)
- Audi (1)
- BMW (2)
- Buick (5)
- Cadillac (1)
- Chevrolet (36)
- Chrysler (16)
- Dodge (29)
- Ford (44)
- GEO (1)
- GMC (8)
- Honda (24)
- Hyundai (11)
- Infiniti (1)
- Isuzu (1)
- Jeep (18)
- Kia (9)
- Lincoln (2)
- Mazda (11)
- Mercury (2)
- Mitsubishi (4)
- Nissan (12)
- Oldsmobile (2)
- Pontiac (9)
- Saab (1)
- Saturn (4)
- Scion (2)
- Subaru (6)
- Suzuki (1)
- Toyota (27)
- Volkswagen (5)
- Volvo (1)
- Trailer Hitch Help
Specialty Trailer Hitch Review- Trailer Hitch Receiver Sizes
- Trailer Hitch Types Review
- Trailer Hitch Installation Tips
- What Do I Need To Tow A Trailer?
- Trailer Hitch Classes Review
Trailer Hitch Classes and Weight Capacity Comparison- Class I Trailer Hitch and Weight Capacities Review
- Class II Trailer Hitch and Weight Capacities Review
- Class III Trailer Hitch and Weight Capacities Review
- Using Stove Wire as a Bolt Leader Demonstration
- Lowering Exhaust Pipe on Vehicle with Rubber Hanger
- Lowering Exhaust Example for Trailer Hitch Installation
- Using Fish Wire for Trailer Hitch Installation
- Drilling a Spare Tire Pan for a Trailer Hitch Installation
- Drilling to Enlarge a Frame Hole for Hitch Install
- Handle Nut Demonstration
- Cleaning Weld Nuts for Trailer Hitch Installation
Search
Contact and Help
What our customers said:
You folks are fast. Thank you very much.
Peter
Ashland, VA
