customer service | view cart 
Trailer Hitch Installation - 2006 Ford F-250 Super Duty
Custom Fit Trailer Hitch
This Product Fits The Following Vehicles
2005 - 2010 Ford F-250 and F-350 Super Duty Pickups only
Products Featured in this Video
Manufacturer InstructionsInstallation of a Trailer Hitch on a 2006 Ford F-250 Super Duty
Today we are going to install part number 41931 from Draw-Tite, and we are going to install this hitch on a 2006 Ford F-250 Super Duty. We are looking at the passengers side frame rail here, and the hitch is going to get attached at this hole here, here, here and here. And you can tell by the whole area that the original factory hitch was on there already so we already took that off. The hitch is going to attach to the same place as the factory hitch did. This one will be a lot heavier hitch. And it will be identical on both sides. The factory wiring we took and just tucked it out of the way for now during our install. We will go ahead and reinstall that after the hitch is done.
Next we will go ahead and start installing our hardware. Each set of holes will get one of these plates. We in our bolt, and we do that for the remaining three sets of holes. At this point we can go ahead and start installing our hitch. We have the hitch hung by a couple of the nuts, and now we will go ahead and install the rest of our hardware. And we have got our conical-tooth washer and our nut. And it is really going to be the same all the way around. All right, at this point we can give the bolts their final torque, as specified in the instructions.
All right, we are going to reattach the factory wiring harness back to the hitch using two additional part numbers. We are going to be using part number 18013, which is a bracket that is going to the hitch right here with a hose clamp, and then the bracket that holds the actual 7-pole is going to mount below it. All right, we will thread our factory harness back through and put our connection back into place. We will put our lock latch back in. And with the wiring hooked up and the bolts all torqued down, that finishes our install of part number 41931 from Draw-Tite.
Filter Videos
- Search By Other Makes
- Acura (4)
- Audi (1)
- BMW (2)
- Buick (5)
- Cadillac (1)
- Chevrolet (36)
- Chrysler (16)
- Dodge (29)
- Ford (44)
- GEO (1)
- GMC (8)
- Honda (24)
- Hyundai (11)
- Infiniti (1)
- Isuzu (1)
- Jeep (18)
- Kia (9)
- Lincoln (2)
- Mazda (11)
- Mercury (2)
- Mitsubishi (4)
- Nissan (12)
- Oldsmobile (2)
- Pontiac (9)
- Saab (1)
- Saturn (4)
- Scion (2)
- Subaru (6)
- Suzuki (1)
- Toyota (27)
- Volkswagen (5)
- Volvo (1)
- Trailer Hitch Help
Specialty Trailer Hitch Review- Trailer Hitch Receiver Sizes
- Trailer Hitch Types Review
- Trailer Hitch Installation Tips
- What Do I Need To Tow A Trailer?
- Trailer Hitch Classes Review
Trailer Hitch Classes and Weight Capacity Comparison- Class I Trailer Hitch and Weight Capacities Review
- Class II Trailer Hitch and Weight Capacities Review
- Class III Trailer Hitch and Weight Capacities Review
- Using Stove Wire as a Bolt Leader Demonstration
- Lowering Exhaust Pipe on Vehicle with Rubber Hanger
- Lowering Exhaust Example for Trailer Hitch Installation
- Using Fish Wire for Trailer Hitch Installation
- Drilling a Spare Tire Pan for a Trailer Hitch Installation
- Drilling to Enlarge a Frame Hole for Hitch Install
- Handle Nut Demonstration
- Cleaning Weld Nuts for Trailer Hitch Installation
Search
Contact and Help
What our customers said:
WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!
Eric
Cedar Springs, MI
